Page History

The figure shows the Access Manager interface object settings panel.

Image Modified

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

1

ID field

Automatically

Displays the identification number of the Access Manager interface object in the system

Whole nonnegative number

-

Depends on number of accessible Access Manager objects in the system

2

Name field

Setting the value in the field

Sets the number of the Access Manager object in the system

Latin, Cyrillic and special symbols

Access Manager

Case-insensitive character string (letters, digits, special symbols excepting > and <).

From 1 to 60 symbols

3

Disable checkbox

Settings checkbox

Sets the Access Manager object state in the system (enabled or disabled)

Boolean type

No

Yes – the Access Manager object is not used in the system.

No – the Access Manager object is used and active

4

Display drop-down list

Selecting the value in the list

Sets the Display parent object for the Access Manager object

Name of created Display objects

Parent Display name

Depends on the number of the Display objects

Position group

The Position group
1

5

Fix position checkbox

Settings checkbox

Is used if it's required to specify coordinates of the Access Manager window and forbid its moving

Boolean type

No

Yes – position of the Access Manager window is fixed.

No – position of the Access Manager window can be changed.

6

2

Monitor drop-down list

Selecting the value in the list

Sets the number of monitor on which the Access Manager window will be displayed

List of accessible computer monitors

Monitor 1

Depends on the number of connected computer monitors

7

3

X:

Setting the value in the field

Sets X coordinate of the upper left corner of the Access Manager window

% of screen width

0

From 0 to

М

M*100, where

М

M is a number of computer monitors
Y:	Setting the value in the field	Sets Y coordinate of the upper left corner of the Access Manager window	% of screen height	0	From 0 to

М

M*100, where

М

M is a number of computer monitors
W:	Setting the value in the field	Sets the Access Manager window width	% of screen width	0	From 0 to

М

M*100, where

М

M is a number of computer monitors
H:	Setting the value in the field	Sets the Access Manager window height	% of screen height	0	From 0 to

М

M*100, where

М

M is a number of computer monitors

Access levels, Users, Time zones, Departments groups

8

Create checkbox

Checkbox

Sets possibility to create the corresponding object in the Access Manager window

Boolean type

Yes

Yes – creating the corresponding object from the Access Manager window is allowed.

No – creating the corresponding object from the Access Manager window is forbidden.

Delete checkbox

Checkbox

Sets possibility to delete the corresponding object in the Access Manager window

Boolean type

Yes

Yes – deleting the corresponding object from the Access Manager window is allowed.

No – deleting the corresponding object from the Access Manager window is forbidden.

Edit checkbox

Checkbox

Sets possibility to edit the corresponding object in the Access Manager window

Boolean type

Yes

Yes – editing the corresponding object from the Access Manager window is allowed.

No – editing the corresponding object from the Access Manager window is forbidden.

Out of groups

9

4

Create users with APB checkbox

Checkbox

Sets the default setting for the user antipassback parameter

Boolean type

No

Yes - by default, the users are created with enabled antipassback

No - by default, the users are created with disabled antipassback

10

5

New departments are visible in root checkbox

Checkbox

Sets availability of new created departments in the Access Manager hierarchy root

Boolean type

Yes

Yes – new departments are available in the Access Manager hierarchy root

No – new departments are not available in the Access Manager hierarchy root

11

6

Tab navigation buttons

Click the button

Buttons switch the active tab

-

Departments tab

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Departments tree	Settings checkbox	Sets available departments in the Access Manager window	Boolean type	Set of boolean variables	Department will be available in the Access Manager window if checkbox is set close to it

Access levels tab

Image Modified

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Mode drop-down list	Selecting the value in the list	Sets the access restriction mode for access levels in the Access Manager interface object	-	Prohibition	Prohibition - restrict the access Permission - allow the access
2	Access levels tree	Checkbox	Specifies the access levels, the access to which should be configured	Boolean type	A set of boolean variables	If the checkbox is set for the access level, the selected access restriction mode will be applied to it in the Access Manager interface object
3	Actions button	Selecting the value in the list	Opens a list of actions for managing the access levels tree	-	-	Minimize - minimizes all access levels in the tree Expand - expands all access levels in the tree Select all - sets the checkboxes for all access levels Remove all - removes checkboxes for all access levels Search - opens the Access level or folder search window for access level or folder searching by the name or identifier

Time zones tab

Image Modified

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

1

Mode drop-down list

Selecting the value in the list

Sets the access restriction mode for time zones in the Access Manager interface object

-

Prohibition

Prohibition - restrict the access

Permission - allow the access

2

Time zones tree

Checkbox

Specifies the time zones, the access to which should be configured

Boolean type

A set of boolean variables

If the checkbox is set for

thetime

the time zone, the selected access restriction mode will be applied to it in the Access Manager interface object

3

Actions button

Selecting the value in the list

Opens a list of actions for managing the time zones tree

-

Minimize - minimizes all time zones in the tree

Expand - expands all time zones in the tree

Select all - sets the checkboxes for all time zones

Remove all - removes checkboxes for all time zones

Search - opens the Time zone or folder search window for time zone or folder searching by the name or identifier

Right tab

Image Added

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
Object management rights group
1	Create checkbox	Checkbox	Sets possibility to create the corresponding object in the Access Manager window	Boolean type	Yes	Yes – creating the corresponding object from the Access Manager window is allowed. No – creating the corresponding object from the Access Manager window is forbidden.
	Delete checkbox	Checkbox	Sets possibility to delete the corresponding object in the Access Manager window	Boolean type	Yes	Yes – deleting the corresponding object from the Access Manager window is allowed. No – deleting the corresponding object from the Access Manager window is forbidden.
	Edit checkbox	Checkbox	Sets possibility to edit the corresponding object in the Access Manager window	Boolean type	Yes	Yes – editing the corresponding object from the Access Manager window is allowed. No – editing the corresponding object from the Access Manager window is forbidden.
2	Check all button
3	Uncheck all button
Forbid to delete group
4	Non-empty departments checkbox	Settings checkbox	Forbids to delete departments if there are users in them	Boolean type	No	Yes – non-empty departments cannot be deleted. No – non-empty departments can be deleted.
5	Assigned Access Levels checkbox	Settings checkbox	Forbids to delete access levels if they are assigned to user(s)	Boolean type	No	Yes – assigned access levels cannot be deleted. No – assigned access levels can be deleted.
6	Assigned Time Zones checkbox	Settings checkbox	Forbids to delete time zones if they are assigned to access levels	Boolean type	No	Yes – assigned time zones cannot be deleted. No – assigned time zones can be deleted.
Out of groups
7	Allow user type change checkbox	Settings checkbox	Enables the ability to change the user type	Boolean type	No	Yes – the user type change is allowed. No – the user type change is not allowed.

Access cards tab

Image Removed

Readers tab

Image Added

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Minimum drop-down list	Selecting the value in the list	Sets the minimum number of access cards that should be assigned to the user	List of values	Unlimited	from 1 to 5 - if the specified number of access cards is not assigned to the user, then this user cannot be saved in the Access Manager interface object. Unlimited - an unlimited number of access cards can be assigned to the user. Prohibited - the user cannot be assigned access cards. Buttons and functional menu for assigning access cards will be inactive in the Access Manager interface object.
2	Maximum drop-down list	Selecting the value in the list	Sets the maximum number of access cards that should be assigned to the user	List of values	Unlimited	from 1 to 5 - if the user is assigned more than the specified number of access cards, then this user cannot be saved in the Access Manager interface object. Unlimited - an unlimited number of access cards can be assigned to the user. Prohibited - the user cannot be assigned access cards. Buttons and functional menu for assigning access cards will be inactive in the Access Manager interface object.
3	Common format drop-down list	Selecting the value in the list	Sets the access cards format	List of values	Default	Default - allows setting an arbitrary value for the facility code and card code. Any letters, numbers and symbols are allowed except: <\| >. Wiegand26 - allows entering a 1-byte facility code (from 0 to 255), and a 2-byte card code (from 0 to 65535). Wiegand32 - allows entering a 2-byte facility code (from 0 to 65535), and a 2-byte card code (from 0 to 65535). Wiegand26 (code only) - the facility code cannot be set, only a 3-byte card code is set (from 0 to 16777215). Wiegand32 (code only) - the facility code cannot be set, only a 4-byte card code is set (from 0 to 4294967295). TouchMemory - the facility code cannot be set, only the 8-byte card code is set. The format is hexadecimal, characters A, B, C, D, E, F are allowed. The code should be 8 characters or longer. If the entered card code is less than 8 characters long, the the higher order digits are filled with zeros. Hikvision - the Hikvision ACS format. It always has a fixed H character in the facility code. The card code is specified by a string with a maximum length of 32 characters. Configurable - allows setting the parameters of the facility code (4) and card code (5). Fixed character - the specified single character will always be hard-coded, which cannot be changed in the Access Manager interface object. String - allows entering a string of 0 to 255 characters. Numeric - allows entering only numbers from 0 to 4294967295. Hexadecimal - allows entering numbers in HEX format (numbers and symbols A, B, C, D, E, F) from 0 to 8 bytes long. Fixed number - similar to Fixed character, but instead of a character, a number between 0 and 4294967295 is used. Regular template - allows defining an access card template with specified restrictions, lengths and value ranges.

Readers tab

Image AddedImage Removed

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

1

Confirm card entered by operator checkbox

Settings checkbox

Sets requirement to confirm card code entering by operator

Boolean type

No

Yes – operator confirmation is required to assign access card to user.

No –operator confirmation is not required to assign access card to user.

2

List of readers

Settings checkbox

Sets list of control readers used for entering user access cards

List of created reader objects in the system

Set of boolean variables

The reader will be available to enter user access card if checkbox is set close to it

Cameras tab

Image AddedImage Removed

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Cameras column	Automatically	Displays list of Camera objects created on the Hardware tab of the System settings dialog window	List of created Camera objects in the system	Names of Camera objects	Depends on number of accessible Camera objects in the system
2	Use checkbox	Settings checkbox	Sets possibility to use camera for assigning photo to user in the Access Manager window	Boolean type	No	Yes – camera can be used for assigning photo. No – camera can't be used for assigning photo
3	Compression drop-down list	Selecting the value in the list	Sets the compression level of the selected video stream	-	Do not compress	Do not compress - compression of the camera video stream is disabled Level 1 - the lowest level of video stream compression .... Level 5 - the highest level of video stream compression
4	Gateway drop-down list	Selecting the value in the list	Sets the Gateway object used for receiving video signal from camera	List of created Gateway objects in the system	Names of Gateway objects	Depends on number of accessible Gateway objects in the system

Others tab

Image RemovedImage Added

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Full name drop-down list	Selecting the value in the list	Sets the way of defining of users record duplicates by name, surname, patronymic	List of available combinations	Not used	Not used – adding users with the same full name is allowed. Surname, name – adding users with the same name and surname and different patronymic is forbidden. Surname, name, patronymic – creating users with the same full name is forbidden.
2	External ID checkbox	Settings checkbox	Indicates whether the users records should be checked for external ID duplicates	Boolean type	No	Yes – creating users with the same external ID is forbidden. No – creating users with the same external ID is allowed.
3	PIN code checkbox	Settings checkbox
4	Vehicle license plate checkbox	Settings checkbox	Indicates whether the users records should be checked for vehicle license plate number duplicates	Boolean type	No	Yes – creating users with the same license plate number is forbidden. No – creating users with the same license plate number is allowed.

4

PIN code checkboxSettings checkbox6Assigned Time Zones checkboxSettings checkboxForbids to delete time zones if they are assigned to access levelsBoolean typeNo

Yes – assigned time zones cannot be deleted.

No – assigned time zones can be deleted.7Assigned Access Levels checkboxSettings checkboxForbids to delete access levels if they are assigned to user(s)Boolean typeNo

Yes – assigned access levels cannot be deleted.

No – assigned access levels can be deleted.

8

5

Non-empty departments checkboxSettings checkboxForbids to delete departments if there are users in themBoolean typeNo

Yes – non-empty departments cannot be deleted.

No – non-empty departments can be deleted.

Recognition Server drop-down list

Selecting the value in the list

Displays a list of Face Recognition Server objects created on the Hardware tab of the System Settings dialog box

List of Face Recognition Server objects created in the system

-

Depends on number of accessible Face Recognition Server objects in the system

9

6

RestAPI port field

Setting the value in the field

Specifies the communication port to connect to the Face Recognition Server through the REST API. By default, it is necessary to set the 10000 value.

Number

0

-

10Allow user type change checkboxSettings checkboxEnables the ability to change the user typeBoolean typeNo

Yes – the user type change is allowed.

No – the user type change is not allowed.

11Module version fieldAutomaticallyDisplays the current version numberNumberCurrent version numberDepends on the current version of the module.

Standard fields tab

Image RemovedImage Added

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Name of field column	Automatic	Displays a list of standard user fields	-	Names of standard user fields	-
2	Drop-down list	Selecting the value in the list	Specifies the permissions to edit, specify, or hide the standard fields from the Access Manager interface object	-	Depends on the standard field	Edit - the field is displayed in the list of user parameters while viewing and editing and is available for editing Hidden - the field is not displayed in the list of user parameters while viewing and editing Read only - the field is displayed in the list of user parameters while viewing and editing but is not available for editing Mandatory - this field is displayed and is required when creating a new user
3	Category column	Setting the value in the field	Specifies the name of the category to which the standard field belongs	-	Depends on the standard field	Any value

Additional fields tab

Image RemovedImage Added

№	Parameter name	Parameter setting method	Description	Data type	Default value	Value range
1	Name of field column	Automatic	Displays a list of additional user fields	-	Names of additional user fields	-
2	Drop-down list	Selecting the value in the list	Specifies the permissions to edit, specify, or hide the additional fields from the Access Manager interface object	-	Depends on the additional field	Edit - the field is displayed in the list of user parameters while viewing and editing and is available for editing Hidden - the field is not displayed in the list of user parameters while viewing and editing Read only - the field is displayed in the list of user parameters while viewing and editing but is not available for editing Mandatory - this field is displayed and is required when creating a new user
3	Category column	Setting the value in the field	Specifies the name of the category to which the additional field belongs	-	Depends on the additional field	Any value

Page tree

Versions Compared

Old Version 13

New Version Current

Key