Requirements for the operation of the Equipment detector are given in the table:
| Camera | - Resolution must be at least 640x360. We also don't recommend using
|
The Equipment detection tool (PPE) operation imposes the following requirements:
...
- a resolution higher than 1920×1080, since higher resolution
|
...
- doesn't increase the detection quality, but significantly increases the consumption of resources. The optimal resolution for solving typical tasks is 1280x720
|
...
- The frame rate per second in the video stream from the camera is at least 3 for solving typical tasks
|
...
- Detection-based analytics works with color images only
| Note |
|---|
| - Correct operation of the detector isn't guaranteed if you use frames that were masked before they got into Axxon One by an IP camera or similar methods.
- Correct operation of the detector isn't guaranteed if you use a fisheye lens.
- The camera tilt angle from top to bottom on a person wearing equipment must not exceed 30°. Otherwise, the detector won't operate correctly.
The following diagrams show the examples of:- The acceptable tilt angle:
 Image Added - The unacceptable tilt angle:
 Image Added
|
|
| Lighting | |
...
- in the scene is at least 200 lux
|
...
- . The detector is applicable in conditions of artificial light. In conditions of insufficient or excessive lighting (night or light-striking), stable operation of the
|
...
...
...
...
- No abrupt changes in lighting
|
...
...
...
| - Moving objects are visually separable from each other
|
...
- The background is mostly static and
|
...
...
- There are no products made of rods in the detection area
|
...
- Moving objects are minimally obscured by static objects in the scene (columns,
|
...
- industrial products, and so on)
- The analyzed scene
|
...
- doesn't have reflective surfaces
|
...
...
...
...
- doesn't result in image offsets greater than 1% of the frame size
|
...
| Note |
|---|
|
- Correct operation of the detection tool is not guaranteed when using a fish-eye lens.
- The camera tilt angle from top to bottom on a person wearing equipment should not exceed 30°. Otherwise the detection tool will not operate correctly.
The following diagrams show the examples of:- The acceptable tilt angle:
Image Removed - The unacceptable tilt angle:
Image Removed
|
...
Hardware requirements for neural analytics operation
...
