Page History

Software The workability software control of workability allows restarting the a module or the Axxon PSIM core if there is no response from the this module.

To configure the software control of workability, do the following: 

1. Go to the settings panel for the System restart service service object. 
   
   

2. The list of run modules running on this computer is automatically displayed automatically in the Module column (1).  

   Info
   title Note
   Modules with the whose state is determined as In process state are marked with the Image Modified  sign. Modules with the  Modules whose state is determined as No response state (red field) or Shutdown are marked with the ! sign  .

3. The current state of modules is automatically displayed in the Status, hours column (2). In the The square brackets display the time of module working time since the last restart is displayed in the HH:MM:SS format. 

4. In the Response timeout, sec field, type-in enter the time period in seconds during which the response from the module will be waited is awaited (3). 
    

   Info
   title Note
   The system will restart You can restart the system if there is no response from the module within after the waiting interval.

5. In the Quantity of restartrestarts field , type-in (4), enter the maximum number of restarts (module or the Axxon PSIM core) that can be performed within the specified time period (4). 
6. In the In time field , type-in (5), enter the new numerical value and/or select in the Time unit dropdown list from the Type of period drop-down list (6) the required metric unit of period if you want to change the value of the time period during which the maximum number of restarts can be performed (5-6). 
7.  In From the Restart dropdown listdrop-down list (7), select the required method way of restart (7). 
   1. Select the module method, option if you want to restart the module without a response. 

   2. Select the core method, to restart the core option if you want to restart the Axxon PSIM core without when there is no response from the module.  

      Info
      title Note
      Select the None value if the restart is not needed In case you don't want to restart the system when there is no response from the module, select the none value.

8. The remaining number of restarts within during the specified current time period is automatically displayed in the Remains of restarts column (8).  

   Info
   title Note
   The module changes over switches to the the Shutdown state if the number of performed restarts exceeds the maximum one during the current time period.

   Info
   title Note
   The remaining reboots counter may be counter of the remaining restarts can reset in the following circumstances cases: a. If the period of time in 1. The counter is reset upon the new restart if the time period during which the maximum number of reboots restarts can be performed has elapsed but expires and the number of reboots performed does not performed restarts doesn't exceed the maximum , then one. 2. The module restarts and the counter will be reset upon a new reboot.  b. If the period of time in which the is reset if the time period during which the maximum number of reboots restarts can be performed has elapsed expires and the maximum number of reboots has been performed, then the module will reboot and the counter will be reset restarts is performed.

9.  In the the Memory (Mb) field (9), enter the value of the memory threshold consumed by the module. Exceeding of this value requires the system restart (9), exceeding which, you must restart the system. 
10. To save changes, click the Apply button (10).

The Configuring the software control of workability is now configuredcomplete.