Page History

...

If you configure user permissions in rights in Axxon PSIM (see Configuration of users and permissionsrights), then specify the Axxon PSIM username and password to connect to a camera. Otherwise, there is no need to specify the username and password.

...

1. PTZ. If you want to control the PTZ camera connected via the ONVIF-Server in the client that receives the video data from the ONVIF-Server, you must create and configure the PTZ device object for this camera. See also Installing Guide for installing and configuring security system components guide, the PTZ configuration section).
2. Microphone, Audio stream. If you want to receive and record audio from the ONVIF-Server in the client that receives the video data from the ONVIF-Server, you must create and configure the Audio card and Microphone objects in Axxon PSIM. See also Installing Guide for installing and configuring security system components guide, the Configuring audio acquisition from IP devices section.
3. Analytics, Metadata. If you want to receive and record the metadata as well as the analytics data from the ONVIF-Server in the client that receives the video data from the ONVIF-Server, you must create and configure the Tracker and VMDA detection objects on the basis of the corresponding Camera object in Axxon PSIM. See also Configuring smart video detection tools. In Axxon One, you must create the ONVIF events detector for the added camera.

...

1. Fixed—disables deleting the profile using the driver.
2. Multicast—enables video transmission in the multicast mode. Besides the option of setting the checkbox to enable the multicast, you must perform the following actions:
   1. Set the registry key:
      HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AxxonSoft\PSIM\Video\TransportProtocols 
      rtsp = multicast
   2. Enable the multicast mode on the settings panel of the RTSP Server object corresponding to the ONVIF-Server object—see Configuring Configuration of the RTSP Server module.