Page History

The Live sound switch object is created on the basis of the Display object in on the Interfaces tab of the System setting dialog box window.

Image Modified

To set up configure the Live sound switch object, do the following:

1. Go to the the Choose devices tab on the setting panel of the the Live sound switch object.
   Image Modified
2. Adjust Configure the position of the the Live sound switch object dialog box window in one of the following ways:
   1. Manually:
      1. Enter the coordinates of the upper left corner: the X (the horizontal indent from the left screen border) and Y (the vertical indent from the top upper screen border) fields (1). The coordinates Coordinates are expressed as a percentage percentages relative to the screen size horizontally and vertically, respectively.
      2. Enter the dialog box window dimensions: the W (the width of the window width) and and H (the height of the window height) fields fields (2). The dimensions Dimensions are expressed as a percentage percentages relative to the screen size horizontally and vertically, respectively.
   2. With a Using the test window:
      1. Click the
      X
      1. Image Added button (3).
      Position

      1. Place the opened Specify dimensions test window

      where

      1. where the Live sound switch window

      should

      1. must be displayed.
         

      Image Removed

      1. Image Added

   3. Click the OK button.
      As a result, the coordinates in the fields  X, Y, W, H will be  fields are set in accordance with the size and position of the test window.

3. From the Monitor drop-down list (4), select the number of the monitor in the system for which the coordinates are set and on which the Live live sound switchshould be must be displayed.
4. In the Add audio sources in the Audio inputs field , add the audio sources in one of the following ways:
   1. One by one:
      1. From the drop-down list in the Number column (5), select the number of the Microphone object, or in the Name column (6), select the name of the Microphone object. The rest of the columns will be Other columns are filled in automatically.

      2. Repeat step i for all required Microphone objects.

         Info
         title Note
         To add a new row line to the table, press click the "down" button on the keyboard. To delete remove a rowline, select it and press Ctrl+Del.

   2. Several microphones at oncefrom the list:
      1. Click the Range button (7). This will open the As a result, the Add devices window opens.
         Image RemovedImage Added
      2. In the list on the left (1), select the necessary required microphones to add (1). To select multiple several lines, you must left-click on them while holding down the Ctrl key on the keyboard.

      3. Move the microphones to the list on the right (3) using the -> button Image Added button (2).

         Info
         title Note
         To remove the audio sources from the list on the right, select them and click <-the Image Added button.

      4. Click the Apply changes and close button (4).
      5. As a result, the selected microphones will be are added to the list on the settings panel of the Live sound switch object.
   3. All microphones created in the hardware tree: click the All button (8).
5. From the Sort drop-down list (9), select the sorting method for in the Audio audio inputs list: by number or by name.
6. In the Audio outputs field, add audio receivers and set up Add audio receivers in the Audio outputs field and configure sorting similarly to audio sources in steps 4 and 5.
7. Go to the Advanced settings tab and set the External window when playing files check box, if it is necessary that a checkbox if you want to open the window with playback progress opens in the interface of the Live sound switch interface window when playing files:
   Image RemovedImage Added
   If you clear the checkbox is not set, then the progress will be is displayed as a percentage in the speaker name during the playback.
8. Click the Apply button to save the changes (10).

Setting up Configuring the Live sound switch object is now completedcomplete.