Page History

Configure To configure the YUAN PD652 video capture card as follows, do the following:

1. Install the card drivers, but first disable the check of drivers checkup of the driver's digital signature in the system.

2. Remove Axxon PSIM and IP DriverPack add-ons.

   Info
   title Note
   Information For the information on how to remove Axxon PSIM can be found in ,see the Removing Axxon PSIM™ software section of Administrator's Guide. The IP DriverPack is removed from the OS Windows control panel.

3. Install the IP DriverPack. The installation file can be found of the driver add-on is in the ipint.driverpack folder of the Axxon PSIM distributive package.

4. Install Axxon PSIM.

   Note
   title ImportantAttention!
   First of all, install the IP DriverPack add-on and then install Axxon PSIM.

5. Connect cameras to YUAN PD652 and connect YUAN PD652 to the computer.
6. Start Axxon PSIM.  
7. Start the Camera discovery tool.

8. Select AxxonSoft in the list of available devices.

   

   Info
   title Note
   The Also, the capturedevice item device can be available in the list. It is to be disabledYou must disable it.

9. Click the Apply button.
10. Corresponding devices are added to the Axxon PSIM object tree. 
11. Go to the settings panel of the created Video Capture Devicecapture device object.
    
12. In the Signal dropdown drop-down list, select the type of signal supported by the device: PAL or NTSC (1).
13. Click the Apply button (2).

Configuring the YUAN PD652 video capture device card is now configuredcomplete.