Page History

...

1. Axxon One is installed in Windows OS.
2. In Windows OS, the Set time zone automatically option is enabled. To enable it , in Windows 10/11, go to to Settings → Time & Language.

To configure the NTP synchronization, do the following:

1. Select Go to the Settings tab → Options (1) tab → NTP synchronizer.
   Image Removed
2. Set the Enable checkbox (3) to enable NTP synchronizer.
In the NTP server link field (4), specify
3. synchronization item.
4. Configure parameters specified in the table:
   

   Parameter	Value	Description
   NTP synchronization
   Enable	Image Added	By default, the NTP synchronization is disabled (the checkbox is cleared). To enable the NTP synchronization, set the checkbox
   	Image Added
   NTP server address		Specify the address of the required NTP

Server.Set the Synchronize on IP devices checkbox (5) to enable time synchronization for the IP devices connected to the Server.

5. server
   Synchronization interval	Minutes	Note title Attention! If you clear the checkbox in the Enable field, then this field is unavailable. The default value is 1440. If necessary, change the time interval. The value must be in the range [15, 10080]
   Synchronize on IP devices	Image Added	By default, the time synchronization for IP devices connected to the server is disabled (the checkbox is cleared). To enable synchronization, set the checkbox Info title Note NTP time synchronization on IP devices works only for devices connected via the ONVIF protocol.
   	Image Added

6. Click the Apply Image Added button. To cancel an action, click the Cancel Image Added button.

NTP synchronization is performed automatically once every 24 hours, and when the settings are changedaccording to the value that is specified in the Synchronization interval parameter, as well as when you change the settings.