Go to documentation repository
Page History
...
There are two ways to search in the archive in the Web-Client:
- standard search;
- quick fast search.
Standard search
To go to the standard search in the archive, do the following:
...
As a result, the interface of the archive search in the Web-Client opens. It is similar to the interface of the main client (see Interface of the Archive Search mode).
...
Fast search
The quick fast search is designed for the simplified search by movement in the marked area.
To go to the quick fast search in the archive, do the following:
- Select the required camera on the Hardware panel or on the layout.
Click the Quick search Fast search
button in the camera's crater.Note title Attention! To display the Quick search Fast search button in the camera's crater, you must meet the following conditions:
- Camera is linked to the archive in which the recording is performed.
- The detector from the Trackers group upon which events are generated is configured for the camera (see Category: Trackers).
- Select the required search area on the grid using the
cursor.
- Click the SEARCH button.
As a result, the interface with search results in the archive by the Motion in area search type opens.
The functionality of the quick fast search is similar to the search by one camera (see Search in the archive of a single camera). You can also perform the quick search by several cameras (see Simultaneous search in the archive of several cameras).
Working with search results
...
The control elements that are described in the table from left to right are located in the lower part of the window with search results:
| Control element | Description |
|---|---|
| Displays search results as tiles (by default) |
| Displays the frame of the video image on which the heat map is built |
| Sorts search results in descending order: from the oldest to the earliest frames (by default) |
| Sorts search results in ascending order: from the earliest to the oldest frames |
| Changes the size of the found frames using the scaling switch or Decrease/ Increase buttons on the left and right sides of the switch, respectively |
| Increases the frame fragments with the selected object |
| Generates a report by search results (see Reporting the search results) |
| Switches between search results if it is performed several times by one camera and the user doesn't close the search tab in the archive |
What to do when you change cameras
...
Overview
Content Tools