Page History

1

IDThe Identification number*
field

Automatically

Displays the ID identification numberof the Map object in the digital distributed video surveillance system with distributed architecture

Sequence of numbers

-NA

From 1 and aboveto 2147483647.

Depends on the number of the Map objects in the digital distributed video surveillance system with distributed architecture

2

The Name*
field

Enter the value in the field

Displays Sets the name of the Map object in the digital distributed video surveillance system with distributed architecture

Latin alphabet, Cyrillic, digits, and service characters

Map

A line containing a sequence of any

characters (letters, digits, service characters

except > and <

characters),

case-

insensitive.

Number of

characters—from 1 to 60

3

The Disable
checkbox

Set the checkbox

Sets the status of the Map object in the digital distributed video surveillance system with distributed architecture

Boolean type

NoClear

Yes – Set—the Map object is disabled and is not in useNo – isn't used

Clear—the Map object is enabled and is in use.used

4

The Display
drop-down list

Select the value from Select in the list

Sets the Display parent Display object of the digital system with distributed system architecture to which the given given Map object refersbelongs

Names of the Display objects registered in the system.

Name of the Display parent Display object.

Depends on the number of the Display objects in the digital distributed video surveillance system with distributed architecture

5

The Search alarmed links recursively
checkbox

Set the checkbox

Defines, if Sets the recursive search for the objects in on the layers is possible.

The recursive search means is a search , where the transfer transition from one layer, containing an object, to another layer, containing a symbol, follows a gradual pattern of moving an icon, is performed by successive jumps to the neighboring layers, using consecutive sequential links

Boolean type

NoClear

Yes – Set—a recursive search is enabled

No – Clear—a recursive search is disabled

Sets the search depth for alarms across map layers if the map is multi-layered. This parameter determines how many layers will indicate the alarm. The value can only be entered if the Search alarmed links recursively checkbox is set

• Empty field—search across layers isn't limited;
• 0—related layers aren't taken into account during the search, that is, in case of alarm, only the layer on which the alarm occurs will blink;
• >0—indicates the number of layers through which the search is performed. For example, the map has six interconnected layers, and the alarm appears on the third layer. If the key value is 1, the alarm will blink on layer 3, as well as on layers 2 and 4

7

The Search for the shortest path
checkbox

Set the checkbox

Enables the search for the shortest path to the alarmed layer.

If there are several paths from the active layer to the alarm alarmed layer, then the shortest path is defined automatically found and selected when the Alarm signal incomes is received (only one icon, that is, the Link to layer icon with the shortest path ,will blink in on the active layer, indicating the shortest path).

Can be enabled only along Works together with the Search alarmed links recursively option only

Boolean type

NoClear

Yes – Set—search for the shortest path is enabled

No – Clear—search for the shortest path is disabled

78

The Over all windows when alarm
checkbox

Set the checkbox

Sets, if Displays the window of the Map interface object can be displayed over all windows of active applications in case of only for the currently active map layer if the Alarm signal incomesis received from any object on this map layer

For more details about the Layer object, see The settings panel of the Map interface Layer object.

Boolean type

NoClear

Yes - Set—the window of the Map interface object will be object of the currently active layer is displayed over all active applications in case of if the Alarm signal incomesis received from any object of the Map interface objectNo - on this map layer

Clear—the window of the Map interface object will not be object of the currently active layer isn't displayed over all active applications in case of the if the Alarm signal incomesis received from any object of the Map interface objecton this map layer

Set—the

functions to request live and archive video are available in the menu of the Camera objects and objects linked with cameras

Clear—the

functions to request live and archive video

aren't available in the menu of the Camera objects and objects linked with cameras

Set—the

function to request archive frame

is available in the menu of the Camera objects and objects linked with cameras

Clear—the

function to request archive frame

isn't available in the menu of the Camera objects and objects linked with cameras

11

The X field

Enter the value in the boxfield

Sets a the X coordinate in the X horizontal axis for the upper left corner of the window of the Map interface objecton the screen

% of the screen width

Not set50

From 0 to M*100, where M is is the number of video the installed monitors installed

11

The Y field

Enter the value in the boxfield

Sets a the Y coordinate in the Y vertical axis for the upper left corner of the window of theMap interface object on the screen

% of the screen height

Not set50

From 0 to M*100, where M is is the number of video the installed monitors installed

12

The W field

Enter the value in the boxfield

Sets the width of the window of the Map interface object window

% of the screen width

Not set44

From 0 to M*100, where M is is the number of video the installed monitors installed

13

The H field

Enter the value in the boxfield

Sets the height of the window of the Map interface object window

% of the screen width

Not set44

From 0 to M*100, where M is is the number of video the installed monitors installed

The 14Autoswitch
Autoswitchcheckbox

Set the checkbox

Activates Sets autoswitch to the Alarm source-layer in the Map interface object

Boolean type

No

Clear

Set—when the Alarm signal is received Yes – in case of an alarm from an object, the system will switch to the source layer where the object is locatedNo – in case of an alarm

Clear—when the Alarm signal is received from an object, the system will not doesn't switch to the source layer where the object is located

Set—the map is displayed on top of all windows

Clear—the map is displayed in standard mode

17

MonitorThe Monitor
drop-down list

Select in the value from the list

The Sets the number of the monitor in OS the system for which the coordinates are specified

Numbers of the monitors in OS

1

From 1 -to 9

Yes –  allows to move the Map interface window manually

No – disables the manual movement of the Map inteface window

Set—allow moving the map window manually

Clear—disable moving the map window manually

12

The Create map copy button

19

Create map copy

Click the button

Creates another Map object with all parameters identical to the given object-

Selects the object tracking monitor.

For details

, see Using absolute telemetry

of the Installing and configuring security system components guide section

Set—when Axxon PSIM starts, the events are uploaded from

the database before and after its startup

Clear—only the events that occurred after the start of Axxon PSIM 

are displayed on the

map 

Sets the

map smoothing method when scaling

Note. Smoothing minimizes ladder-like diagonal edges of the image and gives the impression of softer borders and higher resolution

• low quality;
• high quality;
• bilinear interpolation;
• bicubic interpolation;
• nearest neighbor method;
• high-quality bilinear interpolation;
• high-quality bicubic interpolation

Select

the value from the list

Sets the

videogate through which the video

is displayed on the

map 

Sets the type of object. When an event is received from this object, a pop-up tip with the name of the event is displayed

Sets the object identifier. When

an event

is received from

this object

, a pop-up tip with the name of the event is displayed

Sets the name of an object. When an event is received from this object, a pop-up tip with the name of the event is displayed

Sets the

name of an event. When this event is received, a pop-up tip is displayed