Page History

To work with Axxon One, the following requirements for OpenGL should must be met:

1. Version 2.0 and higher.
2. The following extensions
should
3. must be available: ARB_vertex_program, GL_EXT_blend_func_separate, GL_ARB_framebuffer_object.

Extensions availability can be checked with the You can check the availability of extensions with the OpenGL Extension Viewer program (download).
This  This program also contains a large database of OpenGL support in video cards of various vendors

You cannot start Axxon One

client if the scale of all items on the screen (DPI) is over 100%.

If the screen resolution is set lower than 1280*960 pixels, the correct operation of Axxon One isn't guaranteed

The

server and the

client versions must be

the same

. If not, the correct operation

of Axxon One

 isn't guaranteed

For the correct operation of Axxon One

, the OS

must use the UTF-8 locale

• In one LAN, two

• servers with the same name are not allowed, even if they belong to different Axxon-domains.
• If the name of the client computer and the name of the server computer in the LAN are the same, the correct operation of Axxon One isn't guaranteed.
• You cannot name servers LOCALHOST, LOCAL, TEST, EXAMPLE, or INVALID, as these are special-purpose domain names, and their use can prevent Axxon One from working.
• Computer name:
  • must contain only Latin letters, digits, and the "-" character;
  • the name length must not exceed 15 characters

To install Axxon One, you must log in to Windows as an administrator

For the correct installation of Axxon One, there should must be no spaces at the beginning of the name of the folder which that contains the installer

For the correct and full-

featured operation of Axxon One

, the system must not limit network activity between all

servers and

clients.

If during Axxon One installation, you specified certain ports

, the access to these ports via the TCP and UDP protocols

must be enabled. Otherwise, access to all ports

must be allowed in the system.

For the

client to operate correctly, disable unnecessary network interfaces on the

server. If you want the

server to work with only one network interface, set its gateway and mask in the network settings utility (see Network settings utility)

For the correct operation of Axxon One, you must use different IP addresses

for all network interfaces

on the server or use the interface mask to specify

a designated set of addresses where the

server will

operate (see Network settings utility).

If

there are identical IP addresses on the

servers, there can be problems in

communication between the

servers,

as well as between the

client and the

server

Time must be synchronized among all computers in the system (configured by the user)

If you have embedded storage enabled in the system, synchronization between the

server and the IP device is necessary (see

Embedded storage

).

If there is no synchronization, events from the device can be incorrectly recorded to the database

Before installing installing Axxon One, make sure that your computer uses the latest version of the video card drivers on the computer are fully up to date

NetBIOS name of a computer must meet the following requirements:

• contains only Latin characters, digits and a "-" character;
• does not exceed 15 characters

driver

The Client cannot be started You cannot start the client on a remote desktop through the standard standard Remote Desktop Connection Windows utility

If a computer is connected to an Active Directory domain, one of the following conditions must be met to enable disk access:

1. Disk Access Control Lists must contain only local or
built-in
2. embedded groups and users.
3. Create an AxxonFileBrowser user in the domain and add it to the Users group (see Installation). This behavior is typical only of the file systems that have access permissions (for example, NTFS)