Page History

General information

This action checks recorded video if there is at least one recording interval in the archive from a specific particular camera or a group of cameras for the specified period. 

Configuring an action

To configure this action, do as followsthe following:

1. Go to the Programming tab.
2. In the Event rules or Cycle rules list, click Create... (see Configuring macros).
3. Select a start condition that triggers
Configure the conditions to start
4. a macro (
see Configuring filters for event-driven macros).
5. see Configuring start conditions).
6. Click the Image Added button below start conditions.
7. From the drop-down list, select Check that archive record exists.
8. In the Camera parameter, select a camera or
Select a camera or a
9. group of cameras to check if there is a record in the archive
(1).
10. 
    
Image Removed
11. Image Added
    

    Note
    title Attention!
    If

the start of the macro was triggered by the activation of

12. a macro is initiated by an event from an input or output (see Configuring start conditions

for event-driven macros

13. ) that is not connected to any camera, you need to select a specific camera

here

14. for this action. If you select a group of cameras or a camera that

triggered

15. initiated the

command

16. macro, the action

will not

17. doesn't start.

Select
18. In the Record to parameter, select an archive
where
19. in which you want to check
if recorded video is available (2)
20. that archive record exists. If you leave the field
empty
21. blank,
all recorded video in this camera archives will be checked.
22. the check is performed in all archives associated with this camera.
23. In the Depth of check parameter, specify
Specify
24. the depth of archive check
(3)
25. . The check
time period
26. covers
:
27. [the time of the action start - (minus) the depth of the check; start time of the action].
Select
28. In the Execute if video in archive parameter, select an action if the archive record for the specified period is found
(4)
29. .
Select
30. In the Execute if no video in archive parameter, select an action if the archive
records
31. record for the specified period
are not found (5)
32. isn't found.
    

    Info
    title Note

...

1. If you select E-mail

...

1. notification as an action, then the

...

1. text of the message contains cameras (if a group of cameras

...

1. is selected), for which there

...

1. is no

...

1. record in the archive for the specified period.

...

1. You can also use two special purpose templates in the message: {failureRecordCheck}

...

1. —failed check of a record in

...

1. the archive

...

1. in the format

...

1. Server Name|Camera Name|Archive Name

...

1. . {successRecordCheck}

...

1. —successful check of a record in

...

1. the archive

...

1. in the format

...

1. Server Name|Camera Name|Archive Name

...

1. . Attention! For the correct execution of the macro, synchronize the time across all

...

1. servers within the Axxon-domain.

2. Click the Apply Image Added button. 

Configuration of the Check that archive record exists action is complete.