Versions Compared

Old Version 3

changes.mady.by.user Bahdan Tsiulkou

Saved on

compared with

New Version Current

changes.mady.by.user Ludmila Tanova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to the Hardware tab of the Systemsettings dialog window (1).
    Image Modified
  2. Create the Video capture device object on the basis of the Computer object (2). The settings panel of this object appears on the right part of the System settings window.
  3. From the Type dropdown list (3), select the GBT28181 value.
  4. In the IP field (4), specify the value in the following format:
    [gbt://]deviceID[/videoPort]@serverID[-serverLocalIP[/serverExternalIP]]
    or
    [gbt://]deviceID[/videoPortFirst-videoPortLast]@serverID[-serverLocalIP[/serverExternalIP]]
    where:
    deviceID is the Device ID parameter specified during the IP device setup;
    serverID is the identifier of the Axxon PSIM server created according to the same rules as the IP device ID (see above);
    videoPort is the port for receiving video;
    videoPortFirst-videoPortLast is range of ports for receiving video;
    serverLocalIP is the local IP address of the Axxon PSIM server, which sets the network interface on which the server will be available;
    serverExternalIP is the global IP address of the Axxon PSIM server; this parameter is used when the Axxon PSIM server is behind the gateway. In this case, this IP address is specified as the SIP server address in the IP device settings.
    Info
    titleExamples
    34020000001320000008@34020000002000000001
    34020000001320000008@34020000002000000001-10.0.40.246/113.125.160.58 
    34020000001320000008@34020000002000000001-10.0.40.246 
    34020000001320000008@34020000002000000001-/113.125.160.58 
    34020000001320000008/50200@34020000002000000001 
    34020000001320000008/50200-50210@34020000002000000001-10.0.40.246

  5. In the Port field (5), enter the local port number that the Axxon PSIM server will "listen" to receive messages from the IP device.
    Usually this is the default SIP port—5060.

    Info
    titleNote

    The SIP port of the IP device is detected automatically.

  6. The Name and Password fields aren't used (6).
  7. Click the Apply button (7).
  8. Create the Camera object on the basis of the Video capture device object. The settings panel of this object appears on the right part of the System settings window.
    Image Modified
  9. Click the Apply button.

Further work with the device (for example, displaying video on the monitor, archive recording) is performed using the created Camera object—see the Configuring video subsystem section in the Administrator's Guide document. The PTZ and relay management functions, access to the embedded storage, and so on are configured in the same way as for ordinary IP devices and described in the corresponding sections of this document Installing Guide for installing and configuring security system components guide.

Adding the device that operates via the GB/T28181 protocol is complete.