Versions Compared

Old Version 3

changes.mady.by.user Darya Andryieuskaya

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Tip

Configuring macros

Start conditions are events in the system that trigger start a macro start. When you create event macros, you can select one or more start conditions. If you specify several conditions, a macro can start when any of the specified conditions are met. In addition, macro events can start when specified statistical conditions are met (see Starting the Event rules macros based on statistical data).

Image Modified

The table shows the examples of start conditions to trigger run a macro:

Object

Event

Description
Axxon-domain

Recording started

When you select an event from an Axxon-domain, a macro starts when this event is received from any object in the Axxon-domain

 

Recording stopped

Armed

Armed in private mode

Disarmed

Alarm initiatedAlarm being processed by userAlarm skippedAlarm processedAlarm processed—Confirmed alarmAlarm processed—Suspicious situationAlarm processed—False alarmIP device enabled in settingsIP device disabled in settingsIP device connection lostIP device connection restoredAuthorization failedNo recording to archive

Camera

Recording started

When you select a camera event, a macro starts when this event is received from any camera or a specific camera

Recording stopped

Armed

Armed in private mode

Disarmed

Alarm initiatedAlarm being processed by userAlarm skippedAlarm processedAlarm processed—Confirmed alarmAlarm processed—Suspicious situationAlarm processed—False alarmIP device enabled in settingsIP device disabled in settingsIP device connection lost

You can set a threshold for these type of events—the time in seconds (0 to 3600) between switching from Signal lost to Signal restored state. For example, if a 10-second threshold is set for the Signal lost condition, then at least 10 seconds must pass between the last Signal restored event and the new Signal lost event to start the macro

IP device connection restored

Group of cameras

 

 

 

 

Cameras
Alarms






Alarm initiated

Macro starts when the selected event is received from the camera

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording started

When you select an event from a group of cameras, a macro starts when this event is received from any camera in the group

 

Recording stopped

Armed

Armed in private mode

Disarmed

Alarm initiated

Alarm being processed by user

Alarm skipped

Alarm processed

Alarm processed—Confirmed alarm

Alarm processed—Suspicious situation
Alarm processed—False alarm
IP device enabled in settingsIP device disabled in settingsIP device connection lostIP device connection restoredAuthorization failedNo recording to archiveDetector, Input, Output and PTZ

Triggering start

Note
titleAttention!

If start conditions for a macro include a Triggering start event, any changes in macro's settings that have been saved while the detector is generating an event (before the Triggering end event) lead to re-running the macro. 

The same logic is applied when you create a macro. If you are creating a macro, and the detector is generating an event, the macro is run immediately after the creation is complete.

Triggering endPreset change

For these events, you must specify the preset number and the reason for the action:

  1. Error.
  2. Entered: the action occurs if you select a preset (see Creating and editing presets) with the selected number while controlling a camera (see Controlling a PTZ сamera).
  3. Manual: the action occurs when you manually change the position of a camera when a preset is selected (see Control using step buttons and virtual joystick)
ArchiveArchive partition error

When you select an event from an archive, a macro starts when this event is received from any archive or a specific archive

Archive partition restoredTime scheduleBeginning

When you select an event from a time schedule, a macro starts when this event is received from a specific time schedule

EndServer
Server disconnected

When you select an event from a server, a macro starts when this event is received from a specific server

Server connectedLicense server
Connection to license server broken

When you select an event from a license server, a macro starts when this event is received from a specific license server

Connection to license server restoredEvent source

Specify event text

You must specify a word or phrase. When it comes up in the captions, the macro starts.

For example, this filter starts the macro when the word "Water" appears in the captions.

If a macro is started by a simultaneous combination of words and/or values, use curly braces for logical AND. For example, {Water} {Belgium} {River}

You can select events from detectors as start conditions for a macro. For example, you can configure a macro that triggers when smoke is detected in a room by a smoke detector and initiates an alarm. If you select an event from a detector, a macro triggers when that event is received. The table shows examples of detector events:

Statuses


Armed

Armed in private mode

Disarmed

ACFA
Inputs

Input: Triggering start

Macro starts when the selected event is received from the input

 

Input: Triggering end
Outputs

Output: Triggering start

Macro starts when the selected event is received from the output

 

Output: Triggering end
Events

 

Macro starts when the selected event is received

Detectors

 

 

Motion detectorTriggering start

Macro starts when the selected event is received from the Motion detector

 

Triggering end
Neural trackerTriggering

Macro starts when the selected event is received from the Neural tracker

 

DetectorEventMotion detectorTriggering startTriggering endNeural trackerTriggering

Similitude search: Triggering
Abandoned object detector VIAbandoned object detected: Triggering

Macro starts when the selected event is received from the Abandoned object detector VI

Abandoned object detector VI (Street)

Macro starts when the selected event is received from the Abandoned object detector VI (Street)

Line crossing VIObject crossing dividing line detected: Triggering

Macro starts when the selected event is received from the Line crossing VI detector

Movement in prohibited direction VIObject moving in area detected: Triggering 

Macro starts when the selected event is received from the Movement in prohibited direction VI detector

Motion in area detector VI

Macro starts when the selected event is received from the Motion in area detector VI

Detector of atypical changes in the scene VIAtypical scene changes: Triggering

Macro starts when the selected event is received from the Detector of atypical changes in the scene VI

Audio loss detectorAudio loss detected: Triggering start

Macro starts when the selected event is received from the Audio loss detector

Audio loss detected: Triggering end
Noise detectorNoise detected: Triggering start

Macro starts when the selected event is received from the Noise detector

 

Noise detected: Triggering end
Signal detectorAudio signal detected: Triggering start

Macro starts when the selected event is received from the Signal detector

 

Audio signal detected: Triggering end
Video clarity detectorTampering detected: Triggering

Macro starts when the selected event is received from the Video clarity detector

Crowd estimation VAMultiple objects detected: Triggering

Macro starts when the selected event is received from the Crowd estimation VA detector

Face detector TVFace detected: Triggering

Macro starts when the selected event is received from the Face detector TV

 

 

Face detected: Specified detection
Face recognition
Face detector VAFace detected: Triggering

Macro starts when the selected event is received from the Face detector VA

 

 

 

Face detected: Specified detection
Face recognition
Face detector VLFace detected: TriggeringMacro starts when the selected event is received from the Face detector VL
Face detected: Specified detection
Face recognition
Face detector TV: Mask detectorFace recogniton evasion detected: Triggering start

Macro starts when the selected event is received from the Mask detector TV

 

Face recogniton evasion detected: Triggering end
Face detector VA: Mask detectorFace recogniton evasion detected: Triggering start

Macro starts when the selected event is received from the Mask detector VA

 

Face recogniton evasion detected: Triggering end
Face detector VL: Mask detectorFace recogniton evasion detected: Triggering start

Macro starts when the selected event is received from the Mask detector VL


 

Face recogniton evasion detected: Triggering end
License plate recognition BRSRecognized LP: Triggering

Macro starts when the selected event is received from the License plate recognition BRS detector

License plate recognition IV

Macro starts when the selected event is received from the License plate recognition IV detector

License plate recognition VT

Macro starts when the selected event is received from the License plate recognition VT detector

License plate recognition RRRecognized LP: Triggering

Macro starts when the selected event is received from the License plate recognition RR detector

 

 

Unrecognized LP: Triggering
License plate recognition
License plate recognition RR—Search in archiveRecognized LP: Triggering

Macro starts when the selected event is received from the License plate recognition RR—Search in archive detector

License plate recognition RR—Parking

Recognized LP: Triggering

Macro starts when the selected event is received from the License plate recognition RR—Parking detector

 

Unrecognized LP: Triggering
Vehicle recognition RRRecognized vehicle: Triggering

Macro starts when the selected event is received from the Vehicle recognition RR detector

License plate recognition XRRecognized LP: Triggering

Macro starts when the selected event is received from the License plate recognition XR detector

Audio classification IVAggression: Triggering

Macro starts when the selected event is received from the Audio classification IV detector

 

 

 

 

 

 

Baby cry: Triggering
Dog bark: Triggering
Glass break: Triggering
Gunshot: Triggering
Siren: Triggering
Smoke alarm: Triggering
Fire detectorFire detected: Triggering start

Macro starts when the selected event is received from the Fire detector

 

Fire detected: Triggering end
Glow detectorLight source status changed: Triggering

Macro starts when the selected event is received from the Glow detector

Neural classifierObject presence detected: Triggering start

Macro starts when the selected event is received from the Neural classifier detector

 

Object presence detected: Triggering end
Smoke detectorSmoke detected: Triggering start

Macro starts when the selected event is received from the Smoke detector

 

Smoke detected: Triggering end
Water level detectorWater level overrun detetcted: Triggering start

Macro starts when the selected event is received from the Water level detector

 

Water level overrun detetcted: Triggering end
Equipment detectorPPE absence detected: Triggering

Macro starts when the selected event is received from the Equipment detector

 

 

 

 

 

 

No body PPE: Triggering
No feet PPE: Triggering
No hands PPE: Triggering
No head PPE: Triggering
No legs PPE: Triggering
No other PPE: Triggering
Equipment detector VLPPE absence detected: Triggering

Macro starts when the selected event is received from the Equipment detector VL

Barcode detectorDecoded barcode: Triggering

Macro starts when the selected event is received from the Barcode detector

Neural counterMultiple objects detected: Triggering

Macro starts when the selected event is received from the Neural counter detector

Meta-detectorMatch by text query: Triggering start

Macro starts when the selected event is received from the Meta-detector

 

Match by text query: Triggering end
Fight detector VLFight detected: Triggering

Macro starts when the selected event is received from the Fight detector VL

Queue detectorQueue detected: Triggering

Macro starts when the selected event is received from the Queue detector

Visitors сounterVisitors counter: Triggering start

Macro starts when the selected event is received from the Visitors сounter detector

 

 

Visitors counter: Triggering end
Visitor access in the direction of Entrance: Triggering
Visitor access in the direction of Exit: Triggering
Human pose detector
Sitting person detectorSitting person detected: Triggering start

Macro starts when the selected event is received from the Sitting person detector

 

Sitting person detected: Triggering end
Person down detectorPerson down detected: Triggering start

Macro starts when the selected event is received from the Person down detector

 

Person down detected: Triggering end
Hands up detectorHands up detected: Triggering start

Macro starts when the selected event is received from the Hands up detector

 

Hands up detected: Triggering end
Shooter detector

Shooter detected: Triggering start

Macro starts when the selected event is received from the Shooter detector

 

Shooter detected: Triggering end
Handrail holding detectorHandrail holding violation: Triggering start

Macro starts when the selected event is received from the Handrail holding detector

 

Handrail holding violation: Triggering end
People counterMultiple objects detected: Triggering

Macro starts when the selected event is received from the People counter detector

Close-standing people detectorClose-standing people detected: Triggering start

Macro starts when the selected event is received from the Close-standing people detector

 

Close-standing people detected: Triggering end
Object tracker
Line crossingObject crossing line detected: Triggering start

Macro starts when the selected event is received from the Line crossing detector

 

Object crossing line detected: Triggering end
Loitering in areaObject loitering in area detected (specified time): Triggering 

Macro starts when the selected event is received from the Loitering in area detector

 

 

 

 

 

 

 

 

Group of objects loitering in area detected (specified time): Triggering start
Group of objects loitering in area detected (specified time): Triggering end
Object loitering in area detected (shorter than specified time): Triggering 
Group of objects loitering in area detected (shorter than specified time): Triggering start
Group of objects loitering in area detected (shorter than specified time): Triggering end
Object loitering in area detected (longer than specified time): Triggering start
Object loitering in area detected (longer than specified time): Triggering end
Group of objects loitering in area detected (longer than specified time): Triggering start
Group of objects loitering in area detected (longer than specified time): Triggering end
Stop in areaObject stopping in area detected: Triggering

Macro starts when the selected event is received from the Stop in area detector

 

 

Group of objects stopping in area detected: Triggering start
Group of objects stopping in area detected: Triggering end
Abandoned objectAbandoned object detected: Triggering

Macro starts when the selected event is received from the Abandoned object detector

Motion in areaObject moving in area detected: Triggering start

Macro starts when the selected event is received from the Motion in area detector

 

 

 

Object moving in area detected: Triggering end
Group of objects moving in area detected: Triggering start
Group of objects moving in area detected: Triggering end
Entrance in areaObject entering area detected: Triggering

Macro starts when the selected event is received from the Entrance in area detector

 

 

Group of objects entering area detected: Triggering start
Group of objects entering area detected: Triggering end
Exit from areaObject exiting area detected: Triggering

Macro starts when the selected event is received from the Exit from area detector

 

 

Group of objects exiting area detected: Triggering start
Group of objects exiting area detected: Triggering end
Multiple objectsMultiple objects detected: Triggering start

Macro starts when the selected event is received from the Multiple objects detector

 

Multiple objects detected: Triggering end
Move from area to areaObject moving from area to area detected: Triggering

Macro starts when the selected event is received from the Move from area to area detector


 

 

 

Group of objects moving from area to area detected: Triggering start
Group of objects moving from area to area detected: Triggering end
Archives
Archives

Recording started

Macro starts when the selected event is received from a specific archive

 

Recording stopped

Time zones
Time zones

Beginning

Macro starts when the selected event is received from the time zone

 

End

Event sources
Event source

Event contains text

Macro starts when the selected event is received from the event source. You must specify a word or phrase. When it comes up in the captions, the macro starts.

If you want a macro to start when several words or values come up at once, use curly braces for logical "AND". For example, {Water} {Pepper} {Salt}

PTZ
PTZ


Move to preset

Macro starts when the selected event is received from the PTZ camera

 

 

Camera moved manually

Move to preset failed

Technical state
Archives

Archive partition error

Macro starts when the selected event is received from any archive or a specific archive

 

Archive partition restored
Cameras




IP device enabled in settings

Macro starts when the selected event is received from the device.

For the IP device connection lost and IP device connection restored events, you must set a trigger threshold—the time in seconds (from 0 to 3600) between switching from the Signal lost to the Signal restored state. For example, if you set a 10-second threshold for the Signal lost condition, then at least 10 seconds must pass between the last Signal restored event and the new Signal lost event to start the macro

IP device disabled in settings
IP device connection lost
IP device connection restored

Authorization failed

Servers




No recording to archive

Macro starts when the selected event is received from a specific server. When you select this event, select one of the options:

  • Interrupt
  • Recovery

Archive usage

Macro starts when the selected event is received from the server. When you select the event:

  1. In the Value field, enter the load value as a percentage.
  2. In the Trend field, select the required trend to start the macro:
    • None—There is no trend.
    • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
    • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
    • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Disk usage

Macro starts when the selected event is received from the server. When you select the event:

  1. In the Parameter field, enter a specific parameter to monitor. For example, SERVER1@C:\, where SERVER1 is the name of the domain server and C:\ is the disk letter.
  2. In the Value field, enter the load value as a percentage.
  3. In the Trend field, select the required trend to start the macro:
    • None—There is no trend.
    • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
    • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
    • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Memory usage

Macro starts when the selected event is received from the server. When you select the event:

  1. In the Value field, enter the load value as a percentage.
  2. In the Trend field, select the required trend to start the macro:
    • None—There is no trend.
    • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
    • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
    • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Network usage

Macro starts when the selected event is received from the server. When you select the event:

  1. In the Value field, enter the load value as a percentage.
  2. In the Trend field, select the required trend to start the macro:
    • None—There is no trend.
    • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
    • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
    • Falling—The macro starts if the value of the load parameter is less than the value in the Value field
 

CPU usage

Macro starts when the selected event is received from the server. When you select the event:

  1. In the Value field, enter the load value as a percentage.
  2. In the Trend field, select the required trend to start the macro:
    • None—There is no trend.
    • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
    • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
    • Falling—The macro starts if the value of the load parameter is less than the value in the Value field
Note
titleAttention!

The macro starts only when events that meet the trigger conditions occur in the future. For example, if the CPU load is 85% at the time you create a macro, and the conditions specify that the macro starts when the threshold of 80% is exceeded, the macro only starts the next time the threshold of 80% is exceeded.

Server connections



Connection to license server broken

Macro starts when the selected event is received from the license server

Connection to license server restored

Server disconnected

Macro starts when the selected event is received from a specific server

Server connected

After you select start conditions, in the drop-down list below, set the checkboxes next to devices or groups of devices. The macro starts when the selected start conditions are met for the specified devices.

Image Added