Page History

To configure alarm processing in the system, do the following:

1. Go to the Settings tab → the Options  tab → the Alarm processing item.
2. Enter Set the required parameter settings specified in the table:
   

   Parameter	Value	Description
   Alarm processing
   Time period of operator reaction to alarm	[hours], [minutes], [seconds]

   Enter

   Specify the time during which an alarm must be taken into processing. Otherwise it is assigned the Skipped status. The default value is 5 minutes. To change the time limit, specify

   a

   the value in the range: hours [0, 96] minutes [2, 59] seconds [0, 59] Note title Attention! Minimum time limit is 0 hours, 2 minutes, 0 seconds. Info title Note To take an alarm into processing, you must switch to the Alarm management mode (see Switching to the Alarm management mode). After you take an alarm into processing, the time for handling it is unlimited.
   Time a camera is on alarm layout	[hours], [minutes], [seconds]

   Enter

   Specify the time period during which

   an alarm

   a camera is displayed on the alarm layout (see

   Working with Special

   Configuring layouts). After the specified time

   has elapsed

   expires, the camera with alarm is removed from the alarm layout, and its place is taken by the next

   alarm

   camera, which

   has not

   hasn't yet been displayed on the layout. By default, the time isn't set. To change the time limit, specify

   a

   the value in the range: hours [0, 96] minutes [

   2

   0, 59] seconds [0, 59]

   Mandatory

   Obligatory bookmark with comment
   Confirmed alarm	Image Modified	By default, when an alarm

   is triggered

   occurs, a comment isn't

   provided

   specified (the checkbox is

   clear

   cleared). If

   a

   you want to specify the mandatory comment

   is required

   , set the checkbox
   	Image Modified
   Suspicious situation	Image Modified	By default, when an alarm

   is triggered

   occurs, a comment is

   provided

   specified (the checkbox is set). If

   a

   you don't need the mandatory comment

   isn't required

   , clear the checkbox
   	Image Modified
   False alarm	Image Modified	By default, when an alarm

   is triggered

   occurs, a comment isn't

   provided

   specified (the checkbox is

   clear

   cleared). If

   a

   you want to specify the mandatory comment

   is required

   , set the

   checkbox 

   checkbox
   	Image Modified

3. Click the Apply button.

Configuration of alarm processing is complete.

...