Versions Compared

Old Version 4

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To receive multimedia the video stream from a camera via the RTSP protocol, the camera is to must support this protocol. Information on RTSP support is in For the information indicating the support of the RTSP protocol by the camera, refer to the official reference documentation for the this camera.

For proper operation of the RTSP grabber functionality, make sure that there are no network settings of the used hardware that prevent data transmission via the RTSP protocol.

Info
titleNote.

To If you want to receive the RTSP stream it's required to that comes from the RTSP server of Axxon PSIM (seeConfiguring the RTSP Server module), then you must set the multicast value to the rtsp RTSP parameter in the HKEY_LOCAL_MACHINE\SOFTWARE\AxxonSoft\PSIM\Video\TransportProtocols registry key for a 32-bit system (HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AxxonSoft\PSIM\Video\TransportProtocols for 54a 64-bit system) registry section on the computer where the Camera object is created if RTSP stream is received from the rtsp-server of the Axxon PSIM software (see Configuring RTSP Server module). More . For more information about this parameter see in Changing , see Change the transport protocol used by IP - device section.

To receive a video via the RTSP protocol, do the following:

  1. Create the Video
    2. Capture Device
  2. capture device object
    3. under
  3. on the basis of the Computer object
    4. in
  4. on the Hardware tab of the System settings dialog
    5. box
  5. window (1).
    Image Modified
    6.  
  7. Go to the settings panel
    8. for
  8. of the created object.
    9. Select
  9. From the
    10. RTSP value in the
  10. Type dropdown list (2), select the RTSP value.
    11. Type-in

  11. In the IP address

    12. of rtsp-stream in the IP

  12. field (3), enter the address of the RTSP stream. The length of the address

    13. is not to be longer than

  13. must not exceed 100 characters.

    The format of the address depends on the camera model and its firmware. It is specified in the technical documentation of the vendor. Generally

    14. it

  14. , the address looks like this: 
    rtsp://[<username>:<password>@]<IP address of video source >:<port>/<path_to_stream>.

    15. Info
    titleExample

  15. For the Axis 210A camera, the address of

    16. rtsp-sream

  16. the RTSP stream looks like this:
    rtsp://root:password@10.0.11.121:554/mpeg4/media.amp

    Info
    title
    17. Example
  17. Note
    The address to access
    18. rtsp-streamdelivered  by rtsp Server
  18. the RTSP stream delivered by the RTSP server of Axxon PSIM, looks like rtsp://192.168.0.3:554/1. When
    19. rtsp Server
  19. the RTSP server operates in
    20. the
  20. the Multicast mode, you cannot access it
    21. cannot be accessed
  21. via the RTSP grabber.
    22. Receiving multiple streams via the RTSP driver has been implemented in

  22. Besides, starting with the Drivers Pack v. 3.2.28.1518

    23. and over. Maximum 3 streams are supported. RTSP addresses are semi-colon

  23. version, the system supports receiving multiple streams via the RTSP protocol (multistreaming). In this case, the maximum possible number of streams is three. RTSP stream addresses are separated in the IP address field by the semicolon ";".

    Info
    titleExample

    To get video from two streams,

    24. specify

  24. enter rtsp://admin:admin@10.0.26.16/live/h264;rtsp://admin:admin@10.0.26.16/live/mjpeg in the IP address field.
    To get video from three streams:
    rtsp://admin:admin@10.0.26.16/live/h264;rtsp://admin:admin@10.0.26.16/live/mjpeg;rtsp://admin:admin@10.0.26.16/live/mpeg4

    Starting with the Drivers Pack 3.62.2953 version,

    25. the receipt of an RTSP

  25. the system supports receiving the RTSP stream over HTTPS

    26. stream is supported.Before using this feature, first set the https transport protocol in the rtsp registry key (see Changing

  26. . To do this, you must set the HTTPS transport protocol using the RTSP registry key beforehand (for more information about this parameter, see Change the transport protocol used by IP

    27. -

  27. device

    28. for details on this parameter

  28. ).Example of the link for receiving

    29. an

  29. the RTSP stream over HTTPS

    30. stream InfotitleExample.

  30. :


  31. https://192.168.0.3:443/profile1/media.smp;


  32. https://admin:admin@192.168.0.3:443/profile2/media.smp.

    Note
    title
    33. Important
  33. Attention!
    34. If there are invalid characters in

  34. When you transmit the username or password

    35. (for instance,

  35. that contains invalid characters, including "@"

    36. )

  36. ,via URL, they

    37. are to

  37. must be screened using ASCII codes (hexadecimal format). The "@" character

    38. will be

  38. is screened as %40. For

    39. instance

  39. example, when

    40. connecting

  40. you connect the device over RTSP the link can look like "rtsp://admin:New%40edge@192.168.0.75:554/RVi/1/1".

    41. But

  41. However, if this data is in the login and password fields of the Video capture device

    42. in

  42. object in Axxon PSIM,

    43. then

  43. they stay the same

    44. -

  44. . In this case, "admin" and "New@edge" correspondingly.

  45. Click the Apply button to save the settings of the Video
    46. Capture Device
  46. capture device object (4).
  47. Create the Camera object
    48. under
  48. on the basis of the Video
    49. Capture Device object
  49. capture device object (5).
    Image Modified
  50. Configure the created Camera object
    51. (5)
  51. .
  52. Click the Apply button (6).
  53. Click the Video
    54. button to
  54. field to check if the video is available (7).

If In case the configuration is correct, the video received via the RTSP protocol is displayed in the viewing area.  Further Further actions with the received video stream are performed using the created Camera object.  

Configuring video receipt via the Video-streaming via RTSP protocol is now configuredcomplete.

To receive an audio stream from a camera, you must create and configure the the Audio card and Microphone objects for the audio stream from a camera that is received via the RTSP protocol.  For For this, select the RTSP type of the Audio audio card (see Registration of audio cards and microphones in Axxon PSIM™ software).

 Image Modified

Further actions with received the audio stream are performed using the created Microphone object.