Page History

The You can create the Sensor system object is created under on the basis of the Video Capture Devicecapture device object.

The You can create and configure the Sensor object is created and main parameters are set in the following order:

1. Go to the Hardware tab in (1) on the settings panel of of Axxon PSIM™ (1).
2. Create On the basis of the Video capture device object, create the Sensor system object under the Video Capture Device object or select the select the corresponding object in the object tree in the the Hardware tab on the settings panel of Axxon PSIM ™ (2).
   

3. Specify the ID and name of the Sensor object and select the Video Capture Device object to become the parent of capture device object on the basis of which you want to create the Sensor object (3).

   Info
   title Note
   If the Sensorsensor-Relay relay card is used, then specify that video capture card with ADC to which the Sensorthe sensor-Relay relay card is connected.

4. Select the channel number matching the number of output connector to which the sensor is connected (4).

5. In the group of switches, select the alarm mode of the sensor: at switch on or at switch off. By default, the alarm at switch on mode is selected (5).
   The executive actuating device corresponding to the Sensor system object operates in one of the two modes: alarm at switch on or alarm at switch off.
    

   Info
   title Note
   Sensors connected to Panasonic IP - devices (of the i-Pro series ) trigger generate alarms only at switch off.

   When the you select the alarm at switch off mode is selected, the normal state of the sensor is open. When the sensor closes, it triggers, and as a result, the corresponding actions specified in Axxon PSIM are performed in Axxon PSIM™.

6. In the Hardware dropdown list Detector drop-down list (6), select the type of executive actuating device used as the detector in the guarded area (6)on the protected facility.
   The Hardware Detector parameter is used for selecting the icon on the interactive map. This parameter is essential for better perception of information ( displayed on the map as object icons ) by Operator the operator and for real-time intercepting by Operator if requiredprompt operator intervention if necessary.

7. Types of detectors available for

the

8. the Sensor system object are given in the table.

Hardware

9. Detector	Description
   Infrared	Icon

of

10. on the interactive map for

themotion

11. the motion detectors

PIR

12. Ceiling

    Icon

of

13. on the interactive map for

the 

14. the device installed on the ceiling

of

15. on the

guarded area

16. protected facility
    Glass	Icon

of

17. on the interactive map for

the 

18. the device installed on the window of the

guarded area 

19. protected facility and responding when the window is broken

Fire

20. Heat

    Icon

of

21. on the interactive map for

the device

22. the device responding to changes of

heat 

23. heat conditions

in

24. on the

guarded area

25. protected facility
    Window	Icon

of

26. on the interactive map for

the 

27. the device installed some distance away from the

windowand

28. window and responding when the window is broken
    Smoke	Icon

of

29. on the interactive map for

the 

30. the device responding to smoke

in the guarded area  

31. on the protected facility
    Reed switch	Icon

of

32. on the interactive map for

the 

33. the device responding to locking/

unlocking 

34. unlocking a window, door,

etc.

35. and others

36. Click the Apply button to save the changes.

...

After you create the sensor, it is in the "Armed" state. To change the

...

sensor state, use a macro (see

...

Creating and using macros

...

) or control the

...

sensor on the

...

map (see

...

Configuring the interactive map for object state indication and controlling the objects and Operations with sensors

...

). If the

...

sensor is armed, then at the

...

sensor switching on/off the "Alarm" event

...

is generated depending on the alarm mode

...

setting—see step 5 above. If the

...

sensor is disarmed, the "Closed"/"Opened" events

...

are generated, respectively.