Page History

It is possible to record a video signal received from a LP recognition video camera during a predetermined time interval. If this function is enabled, the recording starts automatically when the LPR channel recognizes an a LP number. 

To enable the function of automatic video recording, do the following:

1. Go to the settings panel of the LPR channel object settings panel, corresponding to the activated module (see Activating the software module used for identifying the plates).
   
   

2. Set the Auto Automatic recording checkbox (1) to enable the recording of the video upon recognizing a LP number (1).

   info

   title	Note

   For the correct auto recording when working with the IntLab program module, specify the Pre-alarm record parameter in the settings panel of the Camera object (see Configuring video in the Pre-alarm record mode).

3. In the field next to the checkbox (2), specify for how many seconds the video should must be recorded after LP number recognition.

   Info
   title Note
   Zero (0) If you specify 0 seconds in this field means that the recording starts at the moment of LP recognition and continues indefinitely, continuous rerording will start when the LP is recognized.

   
   

4. Click the Apply button to save the settings (3).

...

1. .