Page History

The settings panel of the the LPR channel object object includes the following interface elements.:

Image Modified

license Starting auto recording on receiving an event from the motion detector

For normal mode:

Yes – if the camera is armed, the LPR channel scans all video images until the basic motion detection of the Axxon PSIM software is in the Alarm mode; If the camera is not armed, the LPR doesn't work, the Axxon section done.No – the LPR channel scans video images permanentlyYes –if in the Axxon section.

No – the LPR channel scans video images permanently

№

Parameter nameParameter setting method

Method of setting the parameter value

Description

Data typeRepresentation

Default value

Value range

1

Countrydrop-down list

Select the value from the drop-down list

For For AUTO-Uragan, VITVT, RoadARRR, LPR IntelliVisionIV software modules

Selection of the country which numbers it is necessary to recognize

List of available national license plate templates

Depending on the recognition module

Depending on the number of available national license plate templates

Module drop-down list

Select the value from the drop-down list

For CARMEN AR-Auto, ARH-Carriages, ARH-Containers software modulesAR-Railway software modules

Selection of the

license plate recognition SDK

List of license plate recognition SDK

Depending on the recognition module

Depending on the number of installed license plate recognition SDK

2

The Select cameras cameras group

License plates recognition drop-down listLP recognition

Select the value from the drop-down list

Main video camera for license plate recognition

List of available Camera objects

Camera 1

Depending on the number of available Camera objects

Synchronous recording drop-down listshooting

Select the value from the drop-down list

Additional video camera operating together with the main camera

List of available Camera objects

None

Depending on the number of available Camera objects

Auto recording checkboxAutomatic recording

Set the checkbox

Enabling the automatic recording on the LP number recognition

Boolean

NoClear

Yes – automatic Set—automatic recording enabled,

No – automatic Clear—automatic recording disabled

Auto Automatic recording, s field

Enter the value in the text field

Setting the auto recording duration (in seconds)

Seconds

10

0- 100086400

Process half frame

Enable on motion detection trigger checkbox

Set the checkbox

Specifying the frame processing setting

Boolean

Set

Set—smaller frame is stretched, larger frame is cropped

Clear—smaller frame is stretched, larger frame is processed unchanged

Enable on

Select the value from the drop-down list

Enabling and disabling LP recognition by main motion detection or by macros

List

Disabled

Disabled—LPR channel continuously scans the video image.

By macros—enables LP recognition on macros. When you select this option, the Entrance and Exit drop-down lists become available.

Motion detection—enables LP recognition on motion detection. Used to reduce the load on the server. It works differently depending on the selected recognizer mode.

For normal mode:

Yes—if the camera is armed, the LPR channel scans all video images until the basic motion detection of Axxon PSIM is in the Alarm mode. If the camera is not armed, the LPR doesn't work,

No

but manual start using scripts is available (see item 6 in

Scripts used in the Auto

PSIM software package

). Recognition will process frames until the stop command will be

given.

For Parking mode:

If the camera is armed, the LPR channel scans all video images, until the plate will be recognized, after it recognition stops even if the Alarm mode is still in process and procedure repeats when the new trigger of alarm is activated; if the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6

in Scripts used in the Auto

PSIM software package

). Recognition will process frames until the plate will be recognized and then will stop before new manual start

Reduce large resolution checkbox

Set the checkbox

Frame handling setup

Boolean

Yes

Yes – the lesser frame is stretched, the bigger one is cut off
No– the lesser frame is stretched, the bigger one is handled without changes

3

Settings button

Not available for:

Remote recognition
ARH-Carriages
ARH-Containers
CARMEN-Auto
IntLab

Click the button

Access to frame sign settings

-

4

Entry checkbox

Set the checkbox

The vehicle's movement direction will be treated as Entry to the territory

Boolean

No

Yes - The LPR channel considers the vehicle's movement direction as Entry to the territory.

No - The LPR channel does not consider the vehicle's movement direction as Entry to the territory.

Note. This setting is taken into account in the Axxon PSIM Web Report System when working with Auto reports (see Axxon PSIM Web Report System. User Guide).

The Recognition settings tab

Image Removed


Entrance	Select the value from the drop-down list	Enabling LP recogniton	List	<no>	Depending on the number of created macros
Exit	Select the value from the drop-down list	Enabling LP recogniton	List	<no>	Depending on the number of created macros

The Recognition settings tab:

Image Added

№	Parameter name	Method of setting the parameter value	Description	Representation	Default value	Value range
1	The Detection settings group
	Area search threshold Available for: AUTO-Uragan, IV	Enter the value in the text field	Detecting zone sensitivity	Number	60	0-100
	Max. width Available for: AUTO-Uragan, IV, Taiwan, VT	Enter the value in the text field	Maximum available width of license plate	Percentage of frame width	21	0-100
	Max. height Available for: AUTO-Uragan, IV	Enter the value in the text field	Maximum available height of license plate	Percentage of frame height	9	0-100
	Button X Available for: AUTO-Uragan, IV	Click the button	Access to the interactive interface of setting the area width and height	-	-	-
	Min. width

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

1Detection settings groupArea search threshold field.

Available for:

AUTO-Uragan,

LPR IntelliVision

IV,
Taiwan,
VT

Enter the

value in the text field

Detecting zone sensitivity

Number

Minimum available width of license plate

Percentage of frame width

-

60

0-100

Max

Min.

width field.

height

Available for:

AUTO-Uragan,

IntLab

LPR IntelliVision

Taiwan

VIT

IV	Enter the value in the text field

Maximum available width

Minimum available height of license plate

Percentage of frame width

21

-

0-100

Max. height field.

Button X

Available for:

AUTO-Uragan,

IntLab

LPR IntelliVision

Enter the value in the text field

Maximum available height of license plate

Percentage of frame height

9

0-100

Button X

Available for:

AUTO-Uragan
LPR IntelliVision

Click the button

IV

Click the button

Access to the interactive interface of setting the area width and height

-

Min. width field.

Cut image with vehicle

Available for:

AUTO-Uragan,

LPR IntelliVision

Taiwan

VIT

Enter the value in the text field

Minimum available width of license plate

Percentage of frame width

-

0-100

BRS,
AR-Auto,
IV,
Remote recognition,
RR,
Taiwan,
VT

Set the checkbox

Set up the detection settings to the image with a vehicle

Boolean

Clear

Set—frame with a vehicle is cut

Clear—frame with a vehicle is not cut

Allow recognition by request

Min. height field.

Available for:

AUTO

AR-

Uragan

LPR IntelliVision

Enter the value in the text field

Minimum available height of license plate

Percentage of frame width

-

0-100

Auto, RR, VT, Taiwan, AR-Railway	Set the checkbox	Enable the image recognition on demand	Boolean	Clear	Set—on-demand image recognition is enabled Clear—on-demand image recognition is disabled
2	The Search area border, % group
	Left	Enter the value in the text field	Left edge of the LP number search area (%)	% relative to the width of the surveillance window	0	0-100
	Top	Enter the value in the text field	Top edge of the LP number search area (%)	% relative to the width of the surveillance window	0	0-100
	Right	Enter the value in the text field	Right edge of the LP number search area (%)	% relative to the width of the surveillance window	100	0-100
	Bottom	Enter the value in the text field	Bottom

Button X

Available for:

AUTO-Uragan
LPR IntelliVision

Click the button

Access to the interactive interface of setting the area width and height

-

Cut image with vehicle checkbox.

Available for:

AUTO-Uragan
Bioiris
CARMEN-Auto
LPR IntelliVision
Remote recognition
RoadAR
Taiwan
VIT

Set the checkbox

Set up the detection settings to the image with a car

Boolean

No

Yes — frame with a vehicle is cut

No — frame with a vehicle is not cut

Allow recognition on demand checkbox.

Available for:

CARMEN-Auto
RoadAR
VIT
Taiwan
ARH-Carriages
ARH-Containers

Set the checkboxEnable the image recognition on demandBooleanNo

Yes — on-demand image recognition is enabled

No — on-demand image recognition is disabled

2Search area border, % group
Left fieldEnter the value in the text fieldLeft

edge of the LP number search area (%)

% relative to the width of the surveillance window

0

100

0-100

Top fieldEnter the value in the text fieldTop edge of the LP number search area (%)% relative to the width of the surveillance window00-100Right fieldEnter the value in the text fieldRight edge of the LP number search area (%)% relative to the width of the surveillance window1000-100Bottom fieldEnter the value in the text fieldBottom edge of the LP number search area (%)% relative to the width of the surveillance window1000-100Search area checkboxSet the checkbox

Enabling the option of the LP number search area boundaries setting

BooleanNo

Yes — the option of the LP number search area boundaries setting is enabled

No — the option of the LP number search area boundaries setting is disabled

Button XClick the buttonSetting the search area using the mouse---3Direction groupDirection calculation drop-down list.Select value from the listSets the mode of determining the vehicle's movement directionListby LP position

by LP position — the direction is determined by the position of the upper part of the LP number. If the upper part of the LP number at the start of tracking is lower than the upper part of the LP number at the end of tracking, then the direction is defined as From the camera, otherwise - To the camera.

by LP area — the direction is determined by the license plate area. If the LP area at the start of tracking is larger than the LP area at the end of tracking, then the direction is defined as From the camera, otherwise - To the camera.

by SDK — the direction is determined by the SDK. Currently, the following LP recognition modules support this mode: RoadAR, VIT, AUTO-Uragan, LPR IntelliVision.

Direction drop-down list.

Available for:

AUTO-Uragan
Bioiris
IntLab
Remote recognition
RoadAR
Taiwan
VIT
RIDR IntelliVision
CIDR IntelliVision

Select value from the list

Setting the traffic direction to detect the LP numbers

List

any

Any — the direction of movement from the video camera or towards the video camera

From the camera — the direction of movement from the video camera

To the camera — the direction of movement towards the video camera

For the IntLab, RIDR IntelliVision and CIDR IntelliVision modules, the direction of carriage movement in the camera view is selected from left to right or from right to left.

Undefined checkbox

Available for:

ARENA
AUTO-Uragan
Bioiris
CARMEN-Auto
IntLab
Remote recognition
RoadAR
Taiwan
VIT
RIDR IntelliVision
CIDR IntelliVision

Set the checkboxEnables to display the direction as Undefined in the Vehicle Tracer module, if it is impossible to determine the vehicle directionBooleanYes

Yes — if it is impossible to determine the direction of vehicle movement, the direction is displayed as Undefined.

No — if it is impossible to determine the direction of vehicle movement, the direction is not determined.

Record violation checkbox.

Only used when direction is selected in the Direction list (To the camera/
From the camera)

Set the checkbox

Enabling event generating in case of vehicle entering an oncoming lane

Boolean

Yes

Yes — in case if the direction of vehicle moving is not coincide with the specified in the Direction list, the Entered the oncoming lane alarm event will be created.

No — the Entered the oncoming lane alarm event is not created.

The Saving settings tab

Image Removed

Search area	Set the checkbox	Enabling the function of setting borders in the frame to search for a license plate	Boolean	Clear	Set—function of setting borders in the frame to search for a license plate is enabled Clear—function of setting borders in the frame to search for a license plate is disabled
The X button	Click the button	Sets the search area using the mouse	NA	NA	NA
3	The Use GPU group
	Use GPU	Select the value from the drop-down list	Determines the device that will be used for LP recognition	List	Do not use	Depending on the number of available graphics cards. Do not use—possibility of using a graphics card is disabled. The default value Default device—all available graphics cards will be used during recognition Intel GPU—NVIDIA GPU integrated graphics card will be used during recognition
4	The Direction group
	Direction calculation	Select the value from the drop-down list	Sets the mode of determining the vehicle's movement direction	List	by LP position	by LP position—the direction is determined by the position of the upper part of the LP number. If the upper part of the LP number at the start of tracking is lower than the upper part of the LP number at the end of tracking, then the direction is defined as From the camera, otherwise — To the camera. by LP area—the direction is determined by the license plate area. If the LP area at the start of tracking is larger than the LP area at the end of tracking, then the direction is defined as From the camera, otherwise—To the camera. by SDK—the direction is determined by the SDK. Currently, the following LP recognition modules support this mode: RR, VT, AUTO-Uragan, IV
	Direction Available for: AUTO-Uragan, BRS, Remote recognition, RR, Taiwan, VT, RIDR IV, CIDR IV	Select the value from the drop-down list	Sets the traffic direction to detect the LP numbers	List	any	Any—the direction of movement from the video camera or towards the video camera From the camera—the direction of movement from the video camera To the camera—the direction of movement towards the video camera For the RIDR IV and CIDR IV modules, the direction of carriage movement in the camera view is selected from left to right or from right to left
	Undefined Available for: ARENA, AUTO-Uragan, BRS, AR-Auto, Remote recognition, RR, Taiwan, VT, RIDR IV, CIDR IV	Set the checkbox	Enables to display the direction as Undefined in the Vehicle Tracer module, if it is impossible to determine the vehicle direction	Boolean	Set	Set—if it is impossible to determine the direction of vehicle movement, the direction is displayed as Undefined Clear—if it is impossible to determine the direction of vehicle movement, the direction is not determined
	Record violation Only used when direction is selected in the Direction list (To the camera/From the camera)	Set the checkbox	Enables event generating in case of vehicle entering an oncoming lane	Boolean	Set	Set—in case the direction of vehicle moving doesn't coincide with the direction specified in the Direction list, the Entered the oncoming lane alarm event is generated Clear—the Entered the oncoming lane alarm event isn't generated
	Entrance	Set the checkbox	Enables the recording of the vehicle movement direction as Entrance to the territory	Boolean	Clear	Set—LPR channel for the recognized license plates records the direction of vehicle movement as Entrance to the territory Clear—LPR channel for the recognized license plates doesn't record the direction of vehicle movement as Entrance to the territory Note. This setting is taken into account in the WEB Report System PSIM when working with the AUTO reports (see WEB Report System PSIM. User Guide)

The Saving settings tab

Image Added

№	Parameter name	Method of setting the parameter value	Description	Representation	Default value	Value range
1	Record frames to SQL DB	Set the checkbox	Saves video frames of vehicle's recognized license plate into SQL DB	Boolean	Set	Set—the frame with a vehicle is saved into the database Clear—the frame with a vehicle is not saved into the database
	Show captions	Set the checkbox	Enables the license plate overlay as titles on the video image while making report about the recognized license plate	Boolean	Set	Set—captions overlay enabled. Clear—captions overlay disabled
	Deinterlace	Set the checkbox	Enables de-interlacing of video frame with a vehicle when the image is received in full resolution	Boolean	Clear	Set—de-interlacing of video frame with a vehicle is implemented Clear—de-interlacing of video frame with a vehicle is not implemented
	Ratio 4:3	Set the checkbox	Sets the ratio 4:3 of video frame's width and height while making report about the recognized license plate	Boolean	Set	Set—video frame with a vehicle is displayed in ratio 4:3 Clear—initial ratio of the frame while making report about the recognized license plate is not changed
2	The Results filtering settings group
	Min. number of characters in LP	Enter the value in the text field	Minimum number of characters in the license plate	Number	NA	>0
	Min. recognition quality, %	Enter the value in the text field	Minimum recognition accuracy, which is determined by the SDK internal logic and allows you to distinguish a license plate from an unrelated caption on a vehicle. In the online monitor, all results with an accuracy level lower than the specified one are discarded	%	NA	0-100%
	Min. time of LP repetition, s

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

1

Record frames to SQL DB checkbox

Set the checkbox

Saving video frames of vehicle's recognized number into SQL DB

Boolean

Yes

Yes – the frame with a vehicle is saved into the database

No – the frame with a vehicle is not saved into the database

Show captions checkbox

Set the checkbox

Enabling the LP number titles overlaid with the video image while making report about the recognized number

Boolean

Yes

Yes – captions overlay enabled

No – captions overlay disabled

Deinterlace checkbox

Set the checkbox

Enables de-interlacing of video frame with a vehicle when the image is received in full resolution

Boolean

No

Yes - de-interlacing of video frame with a vehicle is implemented

No– de-interlacing of video frame with a vehicle is not implemented

Ratio 4:3 checkbox

Set the checkbox

Set the ratio 4:3 of video frame's width and height while making report about the recognized number

Boolean

Yes

Yes – video frame with a vehicle is displayed in ratio 4:3

No – initial ratio of the frame while making report about the recognized number is not changed

2Settings of results filtering groupMin. number of characters in LP field

Enter the value in the text field

Minimum

number

time of repetition of

characters in

the license plate

numberNumber->0

on video	Seconds	NA	0-3600
3	Archive size, days	Enter the value in the text field	Database archive depth	Days	30	0-5000
4	The Notification settings group
	Notification port

Min. recognition quality, % field

Enter the value in the text field

Minimum image quality

Specifies the number of the port for license plate recognition events

%

Natural number series

-0 - 100%

55555

Any valid unused port numbers.

The number of ports is determined by the system administrator

Xml notification port

Min. time of LP repetition, s field

Enter the value in the text field

Minimum time of repetition

Specifies the number of the port for license plate

on videoSeconds-Up to 60 seconds3

Archive size, days field

Enter the value in the text field

Database archive depth

Days

30

0 - 5000

recognition events in xml format

Natural number series

35555

Any valid unused port numbers.

The number of ports is determined by the system administrator

The Speed camera settings tab

Image Modified

№	Parameter name

Parameter setting method

Method of setting the parameter value	Description

Data type

Representation	Default value	Value range
1	The Speed camera settings group
	Speed camera

settings drop-down list

settings

Select the value from the drop-down list

Selecting

Selects the

speed camera

speed camera to work together with the LPR channel	List of available Speed traps objects	Not specified	Depending on the number of available Speed traps objects
Synchronization time

field

...ms	Enter the value in the text field	The time it takes the car to move from the point of speed detection by the Speed traps server module to the viewing zone of the camera	Milliseconds	Not specified	0-20000
Filter events from

speed camera checkbox

speed camera

Set the checkbox

Enables saving the first speed detected only

Boolean

No

Clear

Yes – only

Set—only the first detected speed value is used, others are ignored until the delay expires or the number is recognized

No – all

Clear—all speed values are used
2	Get speed from video

checkbox

Available for:

AUTO-Uragan,

CARMEN

AR-Auto,

VIT

VT,

RoadAR

RR

Set the checkbox

Enables estimation of speed by video via the Auto

Axxon

PSIM algorithm

Boolean

No

Clear

Yes – vehicle

Set—vehicle speed is estimated by video, the results are displayed over video image as captions

.

No – vehicle

Clear—vehicle speed is not estimated by video

.

Configuration button

Configuration

Click the button

Opens a

dialog box

window to set a line segment

-

NA

-

NA

-

NA

Distance field

Distance

Enter the value in the text field

Sets length of the line segment in the Get speed from video dialog box, in centimeters

Number

Natural number series

-field

NA	>0
Permitted

speed

speed...km/h

Enter the value in the text field

Sets permitted vehicle speed on the observed lane

Number

Natural number series	60	>0
Alarm on speed

limit field

limit...km/h

Enter the value in the text field

Sets maximum vehicle speed. If this speed

is exceed, an alarm event is generatedNumber80>0

is exceed, an alarm event is generated

Natural number series

80

>0

3

Create frame caption

Unavailable for:

External recognizer,
AR-Railway,
AR-Auto

Click the button

Access to frame caption settings

NA

The Settings of LP processing tab

Image Modified

№	Parameter name

Parameter setting method

Method of setting the parameter value	Description

Data type

Representation	Default value	Value range
1	Skipped LPs

list

Use

functional

function menu

Contains the

LP number

license plate templates by which the recognized

numbers will be

license plates are ignored if they match the created list by some criterion. For example,

the LP numbers

license plates of a specific region can be ignored

.

String

-

NA

-

NA
2	Enter LP

field

Enter the value in the text field

Specifies

an LP number

a license plate to check if it is contained in an existing template or not

.

Number

Natural number series

-

NA	>0
Check

button

Click the button

Activates the check of the specified

LP number

license plate against the existing template

-

NA

-

NA

-

NA
3	Character

transcoding (Latin->Cyrillic) checkboxSet the checkbox

conversion

Set the switch

Enables the automatic conversion of Latin characters into Cyrillic characters, if the license plate recognition module returns the recognized license plate in Latin characters. Enables the automatic conversion of Cyrillic characters into Latin characters, if

Enables the automatic transcoding of Latin characters into Cyrillic, if

the license plate recognition module returns the recognized

numbers

license plate in

Latin

Cyrillic characters

Boolean

Position of the switch

No character conversion

No character conversion—automatic conversion is disabled

Yes

Latin-

automatic transcoding

>Cyrillic— automatic conversion of Latin characters

to

into Cyrillic characters is enabled

No

Cyrillic-

automatic transcoding of

>Latin—automatic conversion of Cyrillic characters into Latin characters

into Cyrillic

is

disabled

enabled
4	Skip repeated recognitions,

sec field

s

Enter the value in the text field

Specifies the time period in seconds during which the repeated recognition of one captured license plate will be ignored by the system

.

	Seconds	0	>=0
5	Display result before vehicle

leaves checkbox

leaves

Available for:

AUTO-Uragan,

CARMEN

AR-Auto

VIT

,
VT
RR (including the RR vendor and model recognizer module)

Set the checkbox

Enabling

Enables the results to be displayed before the car leaves the viewing

zone

area

Boolean

Yes

Set

Yes – the

Set—the result is displayed before the vehicle leaves the frame (the license plate of the given vehicle is out of the license plate search boundaries)

No – the

Clear—the result is displayed only after the vehicle leaves the frame
6	Result display delay

field

Enter the value in the text field

The time delay between the first recognition of

the LP number

a license plate and displaying the results	Seconds	3	0-100
7	Recognition number threshold

field

Enter the value in the text field

The number of reliable license plate recognitions, after which the recognition result is displayed

Number

Natural number series

2

0-1000

Page tree

Versions Compared

Old Version 4

New Version Current

Key