Page History

...

1. Select a Server object.
   
2. If you want for the web server to start at the same time as the Server in the Axxon Next software package, set the AnchorOLE_LINK3OLE_LINK3 AnchorOLE_LINK4OLE_LINK4 Activate Autorun setting to Yes (1). The default value is Yes.
3. If you want to disable the web server, set the value of Started to No (2).
4. In the corresponding fields, enter the user name and password for connecting to the web server (3).
5. In the Port field, enter the port number on which the web server will be located (4).
6. In the Prefix field, enter the prefix that is added to the server address (5).In the Maximum delay in seconds field, enter the number of seconds after the last query to the web server, upon which the client will be automatically disconnected (6).
7. In the Group list, select the group of video cameras that you want to make accessible on the web server (7).In the Stream count field, enter the number of video streams that will be simultaneously broadcast on the web server (8). After the stream count limit is met, no additional video streams are broadcast6).
8. Click the Apply button.

The web server is now configured and available over the Internet at the following address: http://<IP address of Axxon Next Server>:<Port>/<Prefix>. For example, if the server's IP address is 10.0.11.1, the port is 8000, and the prefix is /asip-api, then the web server can be accessed at the following address: http://10.0.11.1.:8000/asip-api.