Go to documentation repository
Page History
By default, the video stream is recorded to the archive with the same frame rate as the video capture card digitizes it. Thus, to reduce the archive sizein Axxon PSIM, you can configure the frame rate value of this parameter.
| Info | ||
|---|---|---|
| ||
| The reduction change of the video recording stream frame rate doesn't affect the displaying of the video signal that is displayed on the server surveillance monitor and its transmission transmitted to the Remote Workstations remote workstations by the network. |
To change the recording frame rate of the video stream, do the following:
- Go to the Hardware tab in the System settings window.
- Select the Camera object in the objects
- object tree that corresponds to the required
- adjusted camera. Go to the
- Select the Basic settings tab on the settings panel of the Camera object.
Specify Set the
recording frame rate value
in of the Recording frame
rate field. The _fps parameter. This value mustn't exceed the digitization frame rate value.
The value set for the Recording frame
rate _fps parameter allows calculating the time interval (msec) in which a frame must be captured for archive recording. You can calculate according to the formula:
Time interval = 1000 / Value specified in the Recording frame rate _fps field
Info title Note When setting you set the value of the Recording frame rate_fps parameter, you must note the video digitizing rate by the video capture card and the frame rate (fps) settings in the system. Otherwise, the actual recording speed can differ from the set one. - Click the
- the Apply button.
Setting the video frame rate of the video stream is complete.
Overview
Content Tools