Page History

General information

This action checks recorded video if there is at least one recording interval in the archive from a specific particular camera or a group of cameras for the specified period. 

Configuring an action

To configure this action, do the following:

1. Go to the Programming tab.
2. In the Event rules or Cycle rules list, click Create... (see Configuring macros).
3. Select a start condition that triggers
Configure the conditions to start
4. a macro (
see
5. see Configuring start conditions).
Select
6. Click the Image Added button below start conditions.
7. From the drop-down list, select Check that archive record exists.
8. In the Camera parameter, select a camera or
a
9. group of cameras to check if there is a record in the archive
(1).
10. 
    
Image Removed
11. Image Added
    

    Note
    title Attention!
    If a macro is

started

12. initiated by an event from

an 

13. an input or output (see Configuring start conditions) that is not connected to any camera, you need to select a specific camera

here

14. for this action. If you select a group of cameras or a camera that initiated the

command

15. macro, the action doesn't start.

Select
16. In the Record to parameter, select an archive
where
17. in which you want to check
if recorded video is available (2)
18. that archive record exists. If you leave the field
empty
19. blank,
all recorded video in this camera archives will be checked.
20. the check is performed in all archives associated with this camera.
21. In the Depth of check parameter, specify
Specify
22. the depth of archive check
(3)
23. . The check
time period
24. covers
:
25. [the time of the action start - (minus) the depth of the check; start time of the action].
Select
26. In the Execute if video in archive parameter, select an action if the archive record for the specified period is found
(4)
27. .
Select
28. In the Execute if no video in archive parameter, select an action if the archive
records
29. record for the specified period
are not found (5)
30. isn't found.
    

    Info
    title Note

...

1. If you select E-mail notification

...

1. as an action, then the text of the message

...

1. contains cameras (if a group of cameras

...

1. is selected), for which there is no record in the archive for the specified period.

...

1. You can also use two special purpose templates in the message: {failureRecordCheck}

...

1. —failed check of a record in the archive

...

1. in the format

...

1. Server Name|Camera Name|Archive Name

...

1. . {successRecordCheck}

...

1. —successful check of a record in the archive

...

1. in the format

...

1. Server Name|Camera Name|Archive Name

...

1. . Attention! For the correct execution of the macro, synchronize the time across all

...

1. servers within the Axxon-domain.

2. Click the Apply Image Added button. 

Configuration of the Check that archive record exists action is complete.