Page History
To configure the Satel INTEGRApanel, do the following:
- Select the main Satel Panel object.
In the Password field, enter the password to Satel INTEGRA panel.
In the 1st code If necessary, in the 1st_code_period field,
you may select the delay between entering the panel code and the user code in seconds.
In If necessary, in the Do not update names field,
you may configure whether the object should be kept or overwritten with those names included in the panel configuration. If you
select select False, the module will not rename objects while downloading the configuration from the panel (point 11).
In If necessary, in the Inherit alarm field,
you may configure if alarms from Satel Integra Zones will be indicated on the Satel Integra Panel object.
In If necessary, in the Inherit arm field,
you may configure if all inputs/zones should inherit arm state from Partition.
In If necessary, in the Inherit lost field,
you may configure if all objects should indicate panel communication failure.
In the IP field, enter the IP address of the Satel INTEGRA panel.
In the TCP port field, enter the connection port to the Satel INTEGRA panel.
Click the Apply button to save the settings.
Click the
button button and
select Download configuration from device from the drop-down list select Download configuration from device.
Click the Apply button.
As a result, integration module will download all Satel INTEGRA panel objects, including Modules, Partitions, Areas, Zones and Outputs.