Page History

Axxon PSIM software provides  provides an audio and video synchro recording option.

Audio recording begins when video recording starts and ends when video recording stops. In synchro recording mode, audio files are stored with video files in the server archive in the " VIDEO " folders on the server archive local disks.

To use the synchro recording option, you must configure the Axxon PSIM software audio subsystem properly. For the information on how to configure an audio subsystem in Axxon PSIM, refer to the Configuring audio subsystem section.

If you configure the audio subsystem, then do the following to configure synchro recording on the selected camera and microphone: 

1. Go to the Hardware tab in the System settings window.
2. In the objects object tree on the the Hardware tab, select the Camera object corresponding to the adjusted camera.
3. Go to the Basic settings tab on the settings panel of the Camera object.
   Image Modified

4. In the Recording audio table, from the Number dropdown drop-down list, select the ID of assigned to the microphone that is set for synchro recording when registering you register it in in Axxon PSIM. After this,

5. Click on any area of the table in the Microphone field, after which the name of the

selected Microphone object

6. selected object is automatically displayed

when clicking on any area of the Microphone field in the table

7. .

8. To perform synchro audio recording from two microphones, repeat steps 4-5 for the second microphone.

   Info
   title Note
   Audio from two microphones is recorded to one stream.

9. Click the Apply button.

Configuring the camera and microphone for synchro video and audio recording is complete.