Page History

The You can configure the Person location tracker software  module is configured  on the settings panel of the Person location tracker object . This object that is created on the basis of the Camera object on the Hardware tab of the System settings dialog  window.

Image Modified

The To configure the Person location tracker software module is configured as follows software module, do the following:

1. Go to the settings panel of the Person location tracker object.
   
2. Set the Show objects on image checkbox , if it is necessary to highlight you want to frame the detected object with a frame when  when viewing live video.

3. From the Device drop-down list, select the device on which the neural network will operateoperates. Auto—device is selected automatically: the NVIDIA GPU gets the highest priority, followed by the Intel GPU, then the CPU.
   

   Note
   title Attention!
   We recommend using the GPU. It may take several minutes to launch the algorithm on  the NVIDIA GPU after you apply the settings. You can use caching to speed up future launches (see Configuring the speedup of neural analytics launch on GPU).

4. If you want to use a unique neural network, click the Image Added button in the Tracking model field, click the Image Removed button. In the  field and specify its file in the opened standard Windows Explorer window, specify the neural network file. If you leave the field blank, the default networks will be are used. They are selected automatically depending on the selected device.

5. In the Frames processed per second [0.016, 100] field, set the number of frames per second that will be processed by the detection toolthe detector processes.

   Note
   title Attention!
   For the scenes with static people, the FPS value must be at least 2. For the scenes with moving people—at least 4. The larger this value, the higher the accuracy of pose detection, but the greater the CPU load. With FPS=1, the accuracy will be is no less than 70%. This parameter varies depending on the object speed of movement. To solve typical tasks, the FPS value from 3 to 20 is sufficient. Examples: pose detection for moderately moving objects (without sudden movements) —FPS=3 —3; pose detection for moving objects—FPS=12. objects—12

6. In the Track retention time (s) field, specify the time in seconds in the range from 0.3 to 1000 after which the object track is considered lost. This parameter is useful in situations when one object in the frame temporarily overlaps another.
   

   Info
   title Note
   If an object (track) is close to the frame border, then approximately half the time specified in the Track retention time (s) field must elapse from the moment the object disappears from the frame until its track is deleted.

7. Click the Settings Click the Settings button. As a result, the Detection settings window will openopens.
   

   1. Click the Stop video button (1) to capture a frame.

   2. Click the Area of interest button (2) and specify the area in which the Person person location tracker will operate operates (3). The specified area will be is highlighted with a red frame.
      

      Info
      title Note
      To delete the selected area, click the Image Modified button.

   3. Click the OK button (4) to save the detector settings of the detection tool.

8. Click the Apply button on the settings panel of the Person location tracker object.

9. Configure the Pose detection (see Configuring the Pose detection), the Shooter detection (see Configuring the Shooter detection), or the Handrail grip detection (see Configuring the Handrail grip detection).

Configuration of the Configuring the Person location tracker software module  module is complete.