Page History

In order to configure minimum required settings, which allow communication between the DEA FUSION P2P controller panel and and Axxon One, you may do the following:

1. Install Virtual comport driver, which is used to connect the DEA FUSION P2P controller to the computer via a USB port.
2. Connect the DEA FUSION P2P controller to the computer via a USB port.
3. Open FusionLightService.exe.
   Login window
will appear
4. opens. 
   Image Modified
   

   Parameter	Default value
   Username	installatore
   Password	dea

5. Go to Options.
   Image Modified
6. Go to Serial port. Select the device, which
is to
7. must be configured, from the list, and then
press 
8. click the OK button.
   Image Modified
9. Go to Board connection. For the Type of connection, select USB Port, and then
press
10. click the OK button.
    Image Modified
11. Fill in the password and
press 
12. click the OK button.
    Image Modified
    Controller configuration interface will be displayed.
    Image Modified
13. Go to Configuration.
    Image Modified
14. In the Clients DeaMap.dll / SC-DN-ETHSRV parameters tab, configure the following settings:
    Image Modified
    
    1. In the Name field, specify name for the account.
    2. In the Address field, specify the IP address of the Axxon One server on which the DEA Security Fusion P2P integration module will run.
    3. In the Password field, specify a secure password.
    4. In the Port field, specify the port, which
is to
15. 1. must be used to establish the connection for the user.
For the 
16. 1. In the Receives, Modify and TCP fields, set the value to 1.
       

       Info
       title Note
       The values of the Name, Password and Port parameters will be necessary to

configure 

17. 1. configure the Dea Security Root object of the DEA Security Fusion P2P integration module in Axxon One.

18. Go to Network tab and configure network settings.
    Image Modified
    1. In the Local parameter group, configure network settings of the DEA FUSION P2P controller.
       

       Info
       title Note
       It is recommended to configure static IP address.

    2. In the DeaMap.dll board parameters group, set up
an
19. 1. a unique Name, Port, and Password.
Press
20. 1. Click the OK button.
       

       Info
       title Note
       The values of the Ip Add, Name, Port and Password parameters will be necessary to configure the Fusion P2P Controller object of the DEA Security Fusion P2P integration module in Axxon One.

Preliminary configuration of the DEA FUSION P2P controller is complete.