Page History

...

1. In the list of archives of the domain, select the archive to which you want to copy data from other archives.

2. Select one or more archives from which you want to copy data. You can also replicate video from the embedded camera storage (see Embedded storage).
   

3. Set the replication parameters specified in the table:

   Parameter	Value	Description
   Archive replication
   Replication mode		Select the value for the replication period from the drop-down list Note title Attention! If you change the replication period in the existing replication archive, the archive recordings for the previous period are deleted. If you use an object archive, you can record data and replicate it to the same archive at a time if you select the On demand replication period. For example, in the case of continuous recording and a short-term (for example, 5 minutes) loss of connection with the camera, you can use a macro to replicate the data from the embedded storage to the same archive to which the continuous recording is made.
   	Always	The value is set by default. Replication is performed constantly
   	On demand	You can start replication manually or use macros (see Manual archive replication, Start replication)
   Frame skipping, fps	No	The default value is No. Select the required value from the drop-down list
   	By key frames
   	1 per 240 seconds
   	1 per 120 seconds
   	1 per 60 seconds
   	1 per 30 seconds
   	1 per 20 seconds
   	1 FPS (MJPEG only)
   	2 FPS (MJPEG only)
   	3 FPS (MJPEG only)
   	4 FPS (MJPEG only)
   	5 FPS (MJPEG only)
   	6 FPS (MJPEG only)
   	7 FPS (MJPEG only)
   	8 FPS (MJPEG only)
   	9 FPS (MJPEG only)
   	10 FPS (MJPEG only)
   	11 FPS (MJPEG only)
   	12 FPS (MJPEG only)
   	13 FPS (MJPEG only)
   	14 FPS (MJPEG only)
   	15 FPS (MJPEG only)
   	16 FPS (MJPEG only)
   	17 FPS (MJPEG only)
   	18 FPS (MJPEG only)
   	19 FPS (MJPEG only)
   	20 FPS (MJPEG only)
   	21 FPS (MJPEG only)
   	22 FPS (MJPEG only)
   	23 FPS (MJPEG only)
   	24 FPS (MJPEG only)
   	25 FPS (MJPEG only)
   	26 FPS (MJPEG only)
   	27 FPS (MJPEG only)
   	28 FPS (MJPEG only)
   	29 FPS (MJPEG only)
   	30 FPS (MJPEG only)
   Cameras for replication		Select the required cameras for each archive whose data you want to copy to the replication archive. To select all cameras, click the Select all button Info title Note You can copy the camera data to the replication archive only from one archive. If you select a camera for replication from any archive, this camera becomes unavailable for replication from all other archives. You cannot select cameras if they are already recording to the selected replication archive.

4. Click the Apply button. To cancel an action, click the Cancel button.

Configuring data replication is complete. If the replication period is set to Always, data replication starts immediately after the settings are applied.

...