Page History

Macro starts when the selected event is received from the camera

Input: Triggering start

Macro starts when the selected event is received from the input

Output: Triggering start

Macro starts when the selected event is received from the output

Macro starts when the selected event is received

Macro starts when the selected event is received from the Motion detector

Macro starts when the selected event is received from the Neural tracker

Macro starts when the selected event is received from the Abandoned object detector VI

Macro starts when the selected event is received from the Abandoned object detector VI (Street)

Macro starts when the selected event is received from the Line crossing VI detector

Macro starts when the selected event is received from the Movement in prohibited direction VI detector

Macro starts when the selected event is received from the Motion in area detector VI

Macro starts when the selected event is received from the Detector of atypical changes in the scene VI

Macro starts when the selected event is received from the Audio loss detector

Macro starts when the selected event is received from the Noise detector

Macro starts when the selected event is received from the Signal detector

Macro starts when the selected event is received from the Video clarity detector

Macro starts when the selected event is received from the Crowd estimation VA detector

Macro starts when the selected event is received from the Face detector TV

Macro starts when the selected event is received from the Mask detector TV

Macro starts when the selected event is received from the Mask detector VA

Macro starts when the selected event is received from the Mask detector VL

Macro starts when the selected event is received from the License plate recognition BRS detector

Macro starts when the selected event is received from the License plate recognition IV detector

Macro starts when the selected event is received from the License plate recognition VT detector

Macro starts when the selected event is received from the License plate recognition RR detector

Macro starts when the selected event is received from the License plate recognition RR—Search in archive detector

Macro starts when the selected event is received from the License plate recognition RR—Parking detector

Macro starts when the selected event is received from the Vehicle recognition RR detector

Macro starts when the selected event is received from the License plate recognition XR detector

Macro starts when the selected event is received from the Audio classification IV detector

Macro starts when the selected event is received from the Fire detector

Macro starts when the selected event is received from the Glow detector

Macro starts when the selected event is received from the Neural classifier detector

Macro starts when the selected event is received from the Smoke detector

Macro starts when the selected event is received from the Water level detector

Macro starts when the selected event is received from the Equipment detector

Macro starts when the selected event is received from the Equipment detector VL

Macro starts when the selected event is received from the Barcode detector

Macro starts when the selected event is received from the Neural counter detector

Macro starts when the selected event is received from the Meta-detector

Macro starts when the selected event is received from the Fight detector VL

Macro starts when the selected event is received from the Queue detector

Macro starts when the selected event is received from the Visitors сounter detector

Macro starts when the selected event is received from the Sitting person detector

Macro starts when the selected event is received from the Person down detector

Macro starts when the selected event is received from the Hands up detector

Macro starts when the selected event is received from the Shooter detector

Macro starts when the selected event is received from the Handrail holding detector

Macro starts when the selected event is received from the People counter detector

Macro starts when the selected event is received from the Close-standing people detector

Macro starts when the selected event is received from the Line crossing detector

Macro starts when the selected event is received from the Loitering in area detector

Macro starts when the selected event is received from the Stop in area detector

Macro starts when the selected event is received from the Abandoned object detector

Macro starts when the selected event is received from the Motion in area detector

Macro starts when the selected event is received from the Entrance in area detector

Macro starts when the selected event is received from the Exit from area detector

Macro starts when the selected event is received from the Multiple objects detector

Macro starts when the selected event is received from a specific archive

Macro starts when the selected event is received from the time zone

Macro starts when the selected event is received from the event source. You must specify a word or phrase. When it comes up in the captions, the macro starts.

If you want a macro to start when several words or values come up at once, use curly braces for logical "AND". For example, {Water} {Pepper} {Salt}

Macro starts when the selected event is received from the PTZ camera

Macro starts when the selected event is received from any archive or a specific archive

Macro starts when the selected event is received from the device.

For the IP device connection lost and IP device connection restored events, you must set a trigger threshold—the time in seconds (from 0 to 3600) between switching from the Signal lost to the Signal restored state. For example, if you set a 10-second threshold for the Signal lost condition, then at least 10 seconds must pass between the last Signal restored event and the new Signal lost event to start the macro

Macro starts when the selected event is received from the server. When you select the event:

1. In the Value field, enter the load value as a percentage.
2. In the Trend field, select the required trend to start the macro:
   • None—There is no trend.
   • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
   • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
   • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Macro starts when the selected event is received from the server. When you select the event:

1. In the Parameter field, enter a specific parameter to monitor. For example, SERVER1@C:\, where SERVER1 is the name of the domain server and C:\ is the disk letter.
2. In the Value field, enter the load value as a percentage.
3. In the Trend field, select the required trend to start the macro:
   • None—There is no trend.
   • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
   • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
   • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Macro starts when the selected event is received from the server. When you select the event:

1. In the Value field, enter the load value as a percentage.
2. In the Trend field, select the required trend to start the macro:
   • None—There is no trend.
   • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
   • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
   • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Macro starts when the selected event is received from the server. When you select the event:

1. In the Value field, enter the load value as a percentage.
2. In the Trend field, select the required trend to start the macro:
   • None—There is no trend.
   • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
   • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
   • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Macro starts when the selected event is received from the server. When you select the event:

1. In the Value field, enter the load value as a percentage.
2. In the Trend field, select the required trend to start the macro:
   • None—There is no trend.
   • Leaving—The macro starts if the value of the load parameter left the [Min; Max] range.
   • Rising—The macro starts if the value of the load parameter exceeds the value in the Value field.
   • Falling—The macro starts if the value of the load parameter is less than the value in the Value field

Macro starts when the selected event is received from the license server

Macro starts when the selected event is received from a specific server