Documentation for Axxon One 2.0 version. Documentation for Axxon One 3.0 version is also available.


You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Hardware requirements for neural analytics operation

Requirements for the operation of the Pose Detection and its sub-tools are given in the table:

Camera
  • Resolution must be at least 640x360 pixels. We also don't recommend using a resolution higher than 1920×1080, since higher resolution doesn't increase the detection quality, but significantly increases the consumption of resources. The optimal resolution for solving typical tasks is 1280x720
  • The frame rate per second in the video stream from the camera is at least 8
  • Color image only

Attention!

  • Correct operation of the Pose Detection tools isn't guaranteed when using fisheye cameras and other cameras with strong image distortion.
  • The camera tilt angle from top to bottom on a person must not exceed 30°. Otherwise, the detection tool won't operate correctly.
    The following diagrams show the examples of:
    • The acceptable tilt angle:
    • The unacceptable tilt angle:


Lighting
  • Lighting in the scene is at least 50 lux per square meter. In conditions of insufficient or excessive lighting (night or light-striking), stable operation of the analytics isn't guaranteed
  • No abrupt changes in lighting
Scene and camera angle
  • Moving objects are visually separable from each other
  • The background is mostly static and doesn't change abruptly
  • Moving objects are minimally obscured by static objects in the scene (columns, trees, and so on)
  • The analyzed scene doesn't have reflective surfaces and sharp shadows from moving objects. If present, they must be masked
  • Camera shake doesn't result in image offsets greater than 1% of the frame size
Object images
  • The detected object must be clearly distinguishable by the human eye
  • The detected object must be completely within the frame
  • The image isn't noisy and not distorted by the artifacts of compression algorithm
  • The duration of the object visibility is at least two frames
  • The minimum value of pixel density per meter is observed:
    Image resolutionObject typeMinimum pixel density per meter (ratio of the object width in pixels to the object width in meters)Minimum object size in pixels, width x height
    For Pose Detection sub-tools
    1920x1080Human170~102x309
    1280x720Human128~77x233
    640x360Human80~48x145
    For common sub-tools
    1920x1080Human100~45x187
    1280x720Human68~31x134
    640x360Human35~15x65


  • No labels
Error formatting macro: children: java.lang.NullPointerException