Configuring the control readers in the Access Manager

It is possible to specify the list of control readers used for assigning access cards to users in the Access Manager interface window while configuring the Access Manager program module.

To select control readers, do the following:

1. Go to the settings panel of the Access Manager object.
2. Go to the Readers tab (1).
   
3. Set the Confirm card entered by operator checkbox (2) if it's required that operator confirms assigning of access cards to user.

4. Set checkboxes close to those readers which should be available in the Access Manager window while access cards input (3).

   Note

    Objects corresponding to control readers are created and configured on the Hardware tab of the System settings dialog window (see Control Readers Settings Guide)

5. To save changes click the Apply button (4).

Configuring the control readers in the Access Manager is completed.