Configuring the STX-1000 controller connection

The STX-1000 controller connection is configured as follows:

1. Go to the settings panel of the STX-1000 object, which is created on the basis of the Controller group object.
   
2. In the Address field (1), enter the physical address of the controller.
3. In the Ping (sec) field (2), enter the time period of checking the device communication status in seconds.
4. In the Polling rate (sec) field (3), enter the time period of requesting the controller events in seconds.
5. Click the Apply button (4).

The STX-1000 controller connection is now configured.