Setting the list of cameras to access the Edge storage

You can configure several cameras to view video from the edge storage. Each camera is configured for one channel of the device with edge storage.

If you select one camera for viewing video from several edge storages, then you can view the archive only from the archive that is matched with the camera when the Monitor object is configured (see Selecting and configuring video cameras).

To set the list of cameras to access the edge storage, do the following:

1. Go to the setting panel of the Edge storage object.
   
2. In the Camera column (1), specify the number of the camera used for video archive viewing.
3. Double left click in the Name field (2). This field is automatically filled with the name of the selected camera.

4. In the Recording column (3), specify the channel of the device with edge storage that will be used by camera.

   Note

   Recording names are received from the device with edge storage and aren't changed in Axxon PSIM.

5. After recording selection, video channel within selected recording is automatically selected in the Video track column (4). If necessary, you can select another channel.

   Note

   Names of video tracks are received from the device with edge storage and aren't changed in Axxon PSIM.
6. In the Audio track column (5), specify the audio channel within selected recording.
7. Repeat steps 2–6 for all cameras that you want to use for viewing the archive from the edge storage. To add new cameras to the table, use the down arrow ↓ button on the keyboard. To delete a row, use the Ctrl+Del key combination.
8. Click the Apply button to save the changes (6).

Setting the list of cameras to access the edge storage is completed.