To configure the RISCO Panel integration module, do the following:

  1. Go to the settings panel of the RISCO Panel object.
  2. In the Access code field, enter the access code of the RISCO ProSYS Plus main board.
  3. In the IP Address field, enter the IP address of the RISCO ProSYS Plus main board.
  4. In the Port field, enter the connection port of the RISCO ProSYS Plus main board.
  5. Click the Apply button to save the changes.
  6. Click the  button and select Download configuration from the drop-down list to automatically download the configuration and build the hardware tree.
  7. Click the Apply button.

Configuration of the RISCO Panel integration module is complete. As a result, a hardware tree will be built:

  • No labels