Configuring automatic exiting and locking of the Client

You can set the system to automatically exit and/or lock the Client if the user stays idle for a pre-determined time, i.e. no signals come from HID devices (keyboard, mouse, joystick, etc.).

To do so:

1. Go to Settings → Options → User Interface (1–2).
   
2. In the Period of inactivity before automatic logout (hh:mm) field, enter the duration of user inactivity after which the Client should be quit (3). 
   If the field is blank or equals 00:00, the Client will not be quit.
3. Enter a value in the Period of inactivity till automatic application lock (hh:mm) field to set the time interval (4). To unlock the Client, the user has to re-login.
   

   If the field is left blank or the value is set to 00:00, no locking will occur.

   Note

   • If a viewing layout is open, no automatic blocking occurs.
   • You can lock the Client at any time using hotkeys (see Assigning hot keys, Appendix 6. Hotkeys in Axxon One).
4. Click the Apply button.

Configuration of automatic quit of the Client is now complete.