Preparing the DEA FUSION P2P controller to work with Axxon One

In order to configure minimum required settings which allow communication between DEA FUSION P2P controller panel and Axxon One, you may do the following:

1. Install Virtual comport driver, which is used to connect the DEA FUSION P2P controller to the computer via USB port.
2. Connect DEA FUSION P2P controller to the computer via USB port.
3. Open FusionLightService.exe.
   Login window will appear. 
   
   

   Parameter	Default value
   Username	installatore
   Password	dea

4. Go to Options.
   
5. Go to Serial port. Select the device which is to be configured from the list, and then press OK.
   
6. Go to Board connection. For the Type of connection, select USB Port, and then press OK.
   
7. Fill in the password and press OK.
   
   Controller configuration interface will be displayed.
   
8. Go to Configuration.
   
9. In the Clients DeaMap.dll / SC-DN-ETHSRV parameters tab, configure the following settings:
   
   
   1. In the Name field, specify name for the account.
   2. In the Address field, specify the IP address of the Axxon One server on which the DEA Security Fusion P2P integration module will run.
   3. In the Password field, specify a secure password.
   4. In the Port field, specify the port which is to be used to establish the connection for the user.
   5. For the Receives, Modify and TCP fields, set the value to 1.
      

      Note

      The values of the Name, Password and Port parameters will be necessary to configure Dea Security Root object of the DEA Security Fusion P2P integration module in Axxon One.

10. Go to Network tab and configure network settings.
    
    1. In the Local parameter group, configure network settings of the DEA FUSION P2P controller.
       

       Note

       It is recommended to configure static IP address.

    2. In the DeaMap.dll board parameters group, set up an unique Name, Port, and Password.
    3. Press the OK button.
       

       Note

       The values of Ip Add, Name, Port and Password parameters will be necessary to configure Fusion P2P Controller object of the DEA Security Fusion P2P integration module in Axxon One. 

Preliminary configuration of the DEA FUSION P2P controller is complete.