Configuring the DEA Security Fusion P2P integration module

In order to configure DEA Security Fusion P2P integration module, do the following:

1. Select the main Dea Security Root object.
   
2. In the Controllers to create field, enter the amount of Fusion P2P controller objects to be created.
3. In the Dea Map name field, enter the Name parameter value from Clients DeaMap.dll / SC-DNETHSRV parameters tab in Fusion P2P configuration.
4. In the Dea Map password field, enter the Password parameter value from Clients DeaMap.dll / SC-DNETHSRV parameters tab in Fusion P2P configuration.
5. In the Dea Map port field, enter the Port parameter value from Clients DeaMap.dll / SC-DNETHSRV parameters tab in Fusion P2P configuration.
6. In the State polling time [ms] field, enter the value for how often Axxon One will poll the Fusion P2P controller objects for updates.
7. Click the Apply button to save the settings.
8. Click the button, and from the drop-down list select Download configuration from device.
9. Click the Apply button.

As the result, configured amount of Fusion P2P Controller objects will be created.

In order to configure Fusion P2P Controller object, do the following:

1. In the Password field, enter the Password parameter value from DeaMap.dll board parameters group in Network tab in Fusion P2P configuration.
   
2. In the Port field, enter the Port parameter value from DeaMap.dll board parameters group in Network tab in Fusion P2P configuration.
3. In the Input to create field, enter the amount of Input objects to be created in Axxon One.
   

   Note

   This setting does not control the amount of Line objects - the amount of configured Line objects will be automatically downloaded from the device.

   Every created Input object uses up an appropriate license. 

4. In the IP address field, enter the Ip Add parameter value from Local group in Network tab in Fusion P2P configuration.
5. In the Name field, enter the Name parameter value from DeaMap.dll board parameters group in Network tab in Fusion P2P configuration.
6. Click the Apply button to save the settings.
7. Go to DEA Security Root main object.
8. Click the button, and from the drop-down list select Download configuration from device.
9. Click the Apply button.

As the result, Line objects will appear on the device tree as configured on the device.