By default, in the Video data dialog box the data are not displayed, which has been viewed or for which downloading has been canceled by a user. To display all the video data, unset the checkbox in the lower left corner of the Video data window.
It is also possible o setup the filter for video data displaying. To open the filter setup dialog box, in the Video data dialog box click Configuration... or . The filter creator dialog box opens (Fig. 2.6—8).
Fig. 2.6—8 Filter creator dialog box
When configuring the filter, one may need to perform the following operations:

1. 1. Add a condition or subcondition. To add a condition click the click to add a new condition button or in the filter menu click the corresponding item (Fig. 2.6—9). The condition menu opens by clicking the ... or Filter.

Fig. 2.6—9 Condition menu

1. 1. Remove a condition. To remove a condition, click the corresponding item in the condition menu (Fig. 2.6—9).
   2. Select a logical function for combining conditions (Fig. 2.6—10). A drop-down list for selecting the logical function opens on the left-click on the logical function.

Fig. 2.6—10 Selecting a logical function

1. 1. Select a field for comparison (Fig. 2.6—11). A drop-down list for selecting the field for comparison opens on the left-click on the field name.

Fig. 2.6—11 Selecting a field

1. 1. Select a method of comparing (Fig. 2.6—12). A drop-down list for selecting the method of comparing opens on the left-click on the method name.

Fig. 2.6—12 Selecting a method of comparing

1. 1. Select a value for comparing with. A way to select the value depends on the field type. For example, a date can be set using a calendar (Fig. 2.6—13), a name can be entered in a field (Fig. 2.6—14), etc.

Fig. 2.6—13 Specifying a date
Fig. 2.6—14 Specifying an array of names
After completing settings, the filter can be saved to a file with the .flt extension by clicking the Save... button. This file can then be opened using the Open button.