By default, in the Video data dialog box the data are not displayed, which has been viewed or for which downloading has been canceled by a user. To display all the video data, unset the checkbox in the lower left corner of the Video data window.

It is also possible o setup the filter for video data displaying. To open the filter setup dialog box, in the Video data dialog box click Configuration... or . The filter creator dialog box opens.

When configuring the filter, one may need to perform the following operations:

  1. Add a condition or subcondition. To add a condition click the click to add a new condition button or in the filter menu click the corresponding item. The condition menu opens by clicking the ... or Filter.
  2. Remove a condition. To remove a condition, click the corresponding item in the condition menu.
  3. Select a logical function for combining conditions. A drop-down list for selecting the logical function opens on the left-click on the logical function.
  4. Select a field for comparison (Fig. 2.6—11). A drop-down list for selecting the field for comparison opens on the left-click on the field name.


Fig. 2.6—11 Selecting a field

    1. Select a method of comparing (Fig. 2.6—12). A drop-down list for selecting the method of comparing opens on the left-click on the method name.


Fig. 2.6—12 Selecting a method of comparing

    1. Select a value for comparing with. A way to select the value depends on the field type. For example, a date can be set using a calendar (Fig. 2.6—13), a name can be entered in a field (Fig. 2.6—14), etc.


Fig. 2.6—13 Specifying a date
Fig. 2.6—14 Specifying an array of names
After completing settings, the filter can be saved to a file with the .flt extension by clicking the Save... button. This file can then be opened using the Open button.