This functionality is present in the module to ensure compatibility with the mechanism of internal variables. Its operation is not guaranteed with incompatible readers.

Assigning AIM reader commands with terms is performed as follows:

  1. Go to the Apollo AIM Reader object settings panel.
  2. Click Configure IV (1).
  3. The Connection with variables configuration dialog box opens.
  4. In the drop-down list in the Internal variable column, select the Apollo Internal Variable object corresponding to the variable whose term the command from the reader should change (1).
  5. In the Internal variable drop-down list select the Apollo Internal Variable object corresponding to the required internal variable (2).
  6. Click OK (3).
  7. Click Apply (2).
  8. To save the changes to the controller, write configuration to hardware.

Assigning AIM reader commands with terms is completed.