Hikvision alarm input configuration options depend on Hikvision controller model. Configuring the Hikvision alarm input will be illustrated by an example of a Hikvision 26X controller.

To configure the Hikvision alarm input, do the following:

  1. Go to the Hikvision 26X Alarm input object's settings panel.
  2. In the Number drop-down list (1),  you see the alarm input's ID number corresponding to its ID in the Hikvision controller. You can not change this value. 
  3. In the Zone name field (2), enter the alarm input name under which it will further appear in Intellect.

  4. Select a detector type from the Detector type drop-down list (3):

    Emergency SwitchEmergency switch sensor
    Door MagneticDoor Magnetic
    SmokeSmoke sensor
    Active InfraredActive infrared sensor
    Passive InfraredPassive infrared sensor
    Glass BreakGlass break sensor
    VibrationVibration sensor
    Dual Tech.PIRDual technology PIR sensor
    Dual technology PIR sensorTriple technology PIR sensor
    HumidityHumidity sensor
    TemperatureTemperature sensor
    Combustible GasFlammable gas sensor
    Other DetectorOther type of sensor


  5. Select a zone type from the Zone type drop-down list (4):

    InstantInstant zone
    24 HoursPermanently controlled zone
    Door Emg. open

    Open emergency door zone

    Door Emg. shutdownInactive emergency door zone
    Shield ZoneProtected zone


  6. From the Sensivity drop-down list (5), select a sensivity value in milliseconds: 10ms, 250ms, 500ms, 750ms.

  7. Click the Apply button (6).

The Hikvision alarm input is now configured.