To configure HikVision user cards, do the following:

1. Go to the user editing in the Visitor Management module (see ).
   
   
2. In the advanced options tab, select the Hikvision Extention option and click the button. The Hikvision Extended User Options window opens.
   
   
3. Select the desired controller from the object tree in the Hikvision Extended User Options window.
4. Check the First Card box ( 1 ) if you need to activate all readers connected to this controller by the first card swipe through any of the readers.

5. From the Card Type drop-down list (2), select the card type:

   Invalid	Invalid card
   Ordinary card	Normal card
   Disabled card	Swiping this type of card preventы the door from locking for a time interval specified by the Unlock Time for Disabled Pass parameter (see ).
   Blacklist card	When a blacklisted card is swiped, a system event is generated without granting access
   Patrol card	This type of cards can be used by supervisors
   Stress card	If a user is under duress, this card opens the door and generates a duress alarm
   Super card	This card opens all doors of a given controller within a time zone defined by user's access level
   Visitor card	The map is intended for visitors. You can set the maximum number of swipes for this card in the Max Swipe Times field (see step 6).

   
   

6. Set a limit for a number of Visitor card swipes in the Max Swipe Times field (3).
7. Specify a card's password in the Auth. Pass field (4). The password consists of 4 to 8 digits.
8. Check the boxes for the required card groups in the (5) field.
9. Click the Apply button (6) to save the changes.

The HikVision user cards are now configured.