You can configure the Hikvision alarm output via the Hikvision 26X Alarm input, Hikvision 28X Alarm input, and Hikvision K1T605XF Alarm input objects configuration panel, which are created on the basis of the Hikvision 26X, Hikvision 28X, and Hikvision K1T605XF objects manually or automatically after reading the configuration from the corresponding controller (see Network settings of the Hikvision controller and Configuring the Hikvision controller). As an example of configuring the Hikvision alarm output, let's consider a Hikvision 26X controller.

To configure the Hikvision alarm output, do the following:

1. Go to the settings panel of the Hikvision 26X Alarm output object.
   
2. In the Number drop-down list (1),  you see the alarm output's ID number corresponding to its ID in the Hikvision controller. You can not change this value.
3. In the Relay name field (2), enter the alarm output name under which it will further appear in the Intellect PSIM.
4. In the Output delay, s field (3), enter the desired delay time for your alarm output.
5. Click Apply button (4).

The Hikvision alarm output is now configured.