The icons of the SIP-device and the SIP-operator objects created during the SIP-terminal configuration can be placed on the map to execute commands, for example, if the Display only when calling option was enabled at the stage of the SIP-panel object configuration (see Advanced settings of the SIP-panel interface object).

In this case, the SIP-panel is not displayed if there are no incoming calls, and you can initiate a call using a macro (see Macros for working with SIP-terminal) or from the Map in the function menu of the SIP-device and/or the SIP-operator objects with the following commands: 

  1. Audio call (forward/take)—the device and/or the operator will forward or take the audio call.
  2. Video call (forward/take)—the device and/or the operator will forward or take the video call.

As a result, the SIP-panel window will be displayed. You can also put the current call on hold, resume the call, or end the call from the Map using the corresponding commands.

If there is no call, the icon of the camera assigned to the SIP-device displays the Detach state, because no video from the camera is received. For details on object icons on the Map, see Graphic objects on the Map.