The Testing video capture cards section is designed to test the connection of the cameras to the video capture card.

To use this functionality, Axxon PSIM must be shut down. If it is running, the message "Cards not found" will be displayed.

The settings panel for the Testing video capture cards section is shown in the figure.

 

The parameters of the settings panel are described in the table.


No

Parameter name

Field type

Description

Representation

Default value

Value range

1

Board

Drop-down list

Specifies the video capture card which camera connections are to be checked

List of video capture cards

N/A

Depends on the number of installed video capture cards


2

Test

Button

Starts the testing process of the video capture card. The Axxon PSIM system is to be closed at the time of testing.

N/A

N/A

N/A

The Channels state table

3

Channel

Column (set automatically)

Displays the channels numbers of the selected video capture card

N/A

N/A

From 1 to 16


4

State

Column (set automatically)

Displays the state of camera connections to the channels of the selected video capture cards

N/A

N/A

Attach—the camera is attached

Detach—the camera is detached

If the video capture card is not recognized by the tweaki.exe utility, we recommend you to check whether the camera access is allowed for applications. To do this:

  1. Go to Windows Settings→ Privacy→ Camera.
  2. Allow apps to access your camera by setting the switch to the On position as shown in the figure below.