The Channel object is displayed as a child object of the IP server object (see The IP Server object) in the object tree if a device is an input/output module or a video surveillance control panel (see CCTV Keyboards).

To configure the Channel object, do the following:

1. Go to the Devices tab.
2. Select the Channel object in the object tree. If necessary, you can change the values of the parameters that are listed in the table:
   

   Parameter	Value	Description
   Other
   Enable	Yes	By default, the channel is enabled. To disable it, select No
   	No
   Camera
   Camera	{Short name.Name}	From the drop-down list, select the camera with which you want to bind the channel (see Camera)

   When you enable/disable a channel, all Input and Output child objects are automatically enabled/disabled.

3. Click the Apply  button.

Configuration of a channel is complete.