To configure the object of the Server "Sigur" integration module, do the following:

To operate with the Server "Sigur" integration module in Axxon One + ACFA, you must activate the GATE protocol in the license file of the Sigur software.

  1. Go to the settings panel of the Server "Sigur" object.

  2. In the Login field, enter the username used to log in to the Sigur software.
    The default value is Admin.
  3. In the Password field, enter the user password used to log in to the Sigur software.
  4. In the Address field, enter the IP address of the Sigur software server.
  5. In the Card type field, select the data format of the access cards:
    1. Wiegand-26 (by default),
    2. Wiegand-34.
  6. In the Database password field, enter the password to access the database installed in the Sigur software (see official reference documentation).
    • If you use the Sigur software of a version earlier than 1.1.1.53 or newer than 1.6.6.42 and select the set the password (automatically) option in the Database access password window, you must leave the Database password field blank.
    • Database version (non-editable field). The default value is 5000.
  7. Click the Apply button to save the changes.
  8. Click the  button and select Download configuration from the drop-down list to automatically download the configuration and build the hardware tree.
  9. Click the Apply button.

Configuring the object of the Server "Sigur" integration module is complete. As a result, a hardware tree will be built: