button next to the required node and select Edit.
In the Allocated ports window, specify an unused port. You can change all ports, a few ports, or any specific port.
Click the APPLY button.
By default, nodes in the cluster are assigned dynamic ports. If necessary, you can explicitly specify ports for NativeBL, Web-Server, and so on. You can configure ports individually for each node in the cluster.
To change the ports in a node, do the following:
button next to the required node and select Edit.In the Allocated ports window, specify an unused port. You can change all ports, a few ports, or any specific port.
Click the APPLY button.
As a result, the node will automatically restart and operate on the specified ports.
The allocated ports in the node must not be the same as the ports specified in Ports used by the failover system.
If you want to return the dynamic port allocation, enter the 0 value.