The Testing video capture cards section is designed to test the connection of cameras to the video capture card.
To use this functionality, you must shut down Axxon PSIM. If it is running, the message Cards not found is displayed. |
The settings panel of the Testing video capture cards section is shown in the figure.
The description of the setting parameters of the Testing video capture cards section is given in the table.
No | Parameter name | The way of specifying the parameter value | Description | Representation | Default value | Value range | |
1 | The Board drop-down list | Select the value from the list | Specifies the video capture card to which the camera connections must be checked | List of video capture cards | NA | Depends on the number of installed video capture cards | |
2 | The Test button | Click the button | Starts the testing process of the video capture card. The testing is performed when you shut down Axxon PSIM | NA | NA | NA | |
The Channels state table | |||||||
3 | The Channel column | Automatically | Displays the channel numbers of the selected video capture card | NA | NA | From 1 to 16 | |
4 | The State column | Automatically | Displays the state of the cameras' connection to the channels of the selected video capture card | NA | NA | Connected—camera is connected Disconnected—camera is disconnected | |
If the video capture card isn't recognized by the tweaki.exe utility, we recommend checking whether the camera access is allowed for applications. For this, do the following:
