Purpose of ExportUtility

ExportUtility is used for quick access to the list of cameras of the required server.

Both 32-bit and 64-bit versions of ExportUtility are available.

Start and work with ExportUtility

1. You can start ExportUtility from the Modules or Modules64 folder in the Axxon PSIM installation directory. Examples: C:\Program Files (x86)\PSIM\Modules64, C:\Program Files (x86)\PSIM\Modules.
   You can also start it from a flash drive.
   

   Only registered users can start the utility.

   As a result, the Connection to cameras window opens.
   
2. To work with the utility, do the following:
   1. Select the utility interface language from the drop-down list.
   2. Enter the IP address of the required server in the Address field.
      
   3. Enter a login in the corresponding field.
   4. Enter a password in the Password field.
   5. Click the Connect button.
      As a result, a list of all cameras that are connected to the specified server appears in the lower left corner.
3. For further work with cameras, add them to the table on the right. You can do this by double-clicking on the device name.
4. Click the OK button.
   As a result, the AviExport utility window opens.
   

   For the information on how to work with the AviExport utility, see Working with the AviExport utility.