Working with the Satel INTEGRA integration module

General information about working with the Satel INTEGRA integration module

The Satel INTEGRA integration module is managed through the Map, Equipment Board, and Event Board interface objects, along with Programming rules.

For the information on configuring these interface objects, see Configuring the interactive map, Configuring an Equipment Board and Configuring an Event Board.

For the information on working with these interface objects, see Working with the interactive map, Working with Equipment Board and Working with Event Boards.

For the information on configuring Programming rules, see Configuring macros and counters.

Managing the Satel INTEGRA objects

States

States available for various Satel INTEGRA objects are listed in the tables below:

1. Group object:
   

   State	Icon	State	Icon
   Fire alarm in memory		Disarm
   Exit time < 10s		Arm
   Exit time > 10s		Alarm
   Entry time		1st code entered
   Input violated		Disconnected
   Fire alarm		Alarms verified
   Alarm in memory		1st code entered (v.2)
   Warnings

2. Panel object:
   

   State	Icon	State	Icon
   Fire alarm in memory		Disarm
   Exit time < 10s		Arm
   Exit time > 10s		Alarm
   Entry time		1st code entered
   Input violated		Disconnected
   Fire alarm		Alarms verified
   Alarm in memory		1st code entered (v.2)
   Warnings

3. Relay object:
   

   State	Icon
   Connection lost
   On
   Off

4. LCD, Expander and Object (site) objects:
   

   State	LCD	Expander	Object
   Connection lost
   Normal

5. Door object:
   

   State	Icon
   Closed
   Connection lost
   Open
   Opened long

6. Fire MCP, PIR, Zone, Magnetic detector, Panic button, PIR 360, Seismic detector, Acoustic detector, and Smoke detector objects: 
   

   State	Fire MCP	PIR	Zone	Magnetic detector	Panic button	PIR 360	Seismic detector	Acoustic detector	Smoke detector
   Alarm
   Alarm in memory
   Arm
   Temporary locked (Bypass)
   Disarm
   Permanently locked (Isolated)
   Disconnected
   Masked
   Masked in memory
   Tamper
   Tamper alarm
   Tamper alarm in memory
   Violation too long
   No violation too long
   Violation

Commands

Commands accessible via Axxon One interface for various types of Satel INTEGRA objects are listed in the table below: