Setting the list of cameras to access the edge storage

One can configure several cameras to view video from the edge storage. Each camera is configured for one channel of the device with edge storage.

If one camera is selected for viewing video from several edge storages, then the archive is viewed only from the archive that is matched with camera while the Monitor object is configured (see Selecting and configuring video cameras section).

To set the list of cameras to access the edge storage do the following:

1. Go to the setting panel of the Edge storage object.
   
2. In the Camera column specify the number of the camera used for video archive viewing (1).
3. Double left click in the Name field (2). This field is automatically filled with the name of selected camera.

4. In the Recording column specify the channel of the device with edge storage that will be used by camera (3).

   Note.

   Recording names are received from the device with edge storage and are not changed in Axxon PSIM™.

5. After recording selection, video channel within selected recording is automatically selected in the Video track column (4). It can be re-selected if necessary.

   Note.

   Names of video tracks are received from the device with edge storage and are not changed in Axxon PSIM™.
6. In the Audio track column specify the audio channel within selected recording (5).
7. Repeat steps 2-6 for all cameras that are to be used for viewing the archive from the edge storage.
8. To save all the changes click Apply (6).

Setting the list of cameras to access the edge storage is completed.